Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Surveyor Autosampler Plus, Thermo Fisher Scientific (CAT#: STEM-CPO-0685-ZJF)

Highlights

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned

Cat Number: STEM-CPO-0685-ZJF

Application: For chromatography

Add to Cart



Description

The manufacturer of the Surveyor Autosampler Plus, Thermo Fisher Scientific is Thermo Fisher Scientific.
The Thermo Finnigan Surveyor Autosampler Plus is specifically designed to maximize throughput, the Finnigan Surveyor Autosampler Plus has a novel sampling arm design minimizing excess movement, maximizing the number of injections in a given time. Injection cycles less than 30 seconds can be achieved using the Finnigan Surveyor Autosampler Plus. The Autosampler Plus holds 200 standard 1.8 mL sample vials or a tray insert with three 96 or 384 well microtiter plates. The built-in syringe flush and needle wash minimze carryover. The Finnigan Surveyor Autosampler Plus heat exchanger equilibrates the mobile phase prior to sample introduction.

Specification

Condition: Refurbished, Certified Pre-owned
Vial Capacity: 200 vials with tray temperature control, Three 96 or 384-Well Microtiter Plates
Injection Precision: 1.0% RSD at 5 uL and higher
Minimum Sample Volume: 1 uL can be injected from a 5 uL sample
Injection Volume: 20 uL loop standard, up to 1000 uL injections with larger loops and syringe
Sample Carryover: 0.1%, 6 mL flush can be used for internal and external needle wash
Needle Height: Programmable in 0.1 mm increments.Active vial bottom search selectable on/off
Column Oven: 5°C to 95°C +/- 0.5°C selectable in 1°C increments.
Tray Temperature Control: 0°C to 60°C +/- 0.5°C selectable in 1°C increments
Remote Inputs: Pump Ready and Inject Hold
Remote Outputs: Pump Stop, Autosampler Plus Ready, Inject, and Gradient Start, 4 Timed Events
Remote Controls: Ethernet interface for PC-based software control.
Sample Preparation: Capacity for 4, 15 mL reagent vials for flushing, washing, sample dilution, and/or reagents for sample derivatization
Ambient Environment: 10°C to 40°C, 5 to 95% relative humidity, non condensing
Operating Temperature: 10 °C to 40 °C
Dimensions (H×W×D): 37 × 36 × 50 cm
Power Requirements: 100/120/220/240 Vac nominal; 550VA, 50/60Hz
Product Certification: EMC, CE, TUV-C/US, FCC (EMI)
Optional: Spare CPU PCB board (p/n F9015-030)

Features

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Related Products

Surveyor Autosampler, Thermo Fisher Scientific
Surveyor HPLC System, Thermo Fisher Scientific
Surveyor MS Pump, Thermo Fisher Scientific
Advertisement