Thermo Scientific ESA Coulochem III Electrochemical Detector, Thermo Fisher Scientific (CAT#: STEM-CPO-0963-ZJF)

The manufacturer of the Thermo Scientific ESA Coulochem III Electrochemical Detector is Thermo Fisher Scientific.
This Thermo Scientific ESA Coulochem III Electrochemical Detector is the standard for electrochemical detection that has greater sensitivity, selectivity, and as wide a dynamic range.

Condition: Pre-owned
Detector Configuration: DC Potentiostat for 1or 2 electrodes and/or Scan Mode/Pulse Mode; Potentiostat for Guard cell
Operating Modes: DC, Pulse, Scan
Potential Range: ± 2000 mV in 1 mV steps
Full Scale Current Range: 10 pA to 1 mA in 1-2-5 sequence (DC mode)
Filter Time Constants: 0.2 to 10 seconds in 1-2-5 sequence (DC mode)
Output Noise: <750 fA (0.75 pA) with a 500 MΏ, 0.47 µF test load and a 2 second filter (DC Mode)
Signal Output: ± 100 mV; ± 1 V
Function Keys: Autozero, Event marker, Cell On/Off, Run/Stop
Interface: USB, RS-232C Interface Capability
Full parametric instrument control of DC and Pulse
Method Storage: Up to 25 methods (any combination of DC, Scan, Pulse, and Time line)
Output Resolution: 24 bit bipolar
Guard Cell Potentials: ± 200 mV in 1 mV steps
Coulochem Module: Dimensions and Weight: 28.6 × 23 × 49.5 cm (11.25 × 9 × 19.5 in);
6.7 kg (14.8 lbs) Detector only
Power: 100-120 V, 60 Hz; 230-240 V, 50 Hz
Certifications: UL, CSA, CE

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Certified with warranty

Thermo Scientific Dionex UltiMate 3000 Focused RS Pump with Degasser SRD-3400, Thermo Fisher Scientific
PrepStar Solvent Delivery Module 218, Varian
ProStar 410 HPLC Autosampler, Varian