TriScroll 300 Inverter (CAT#: AM-LE-0410-Y)

TriScroll 300 Inverter is manufactured by Agilent Technologies, which combines the advantages of frequency conversion technology with the good performance of the Agilent TriScroll dry primary vacuum pump, has recognized reliability and durability, and has stable performance and extremely low maintenance costs.

Pumping speed at 60 Hz: 250 L/m, 15 m3/h, 8.8 cfm (drive frequency is 60 Hz, variable)
Ultimate vacuum: 1.3 x 10-2 mbar (1.0 x 10-2 Torr)
Maximum inlet pressure: 1.0 atm (0 psig)
Maximum outlet pressure: 1.1 atm (1.5 psig)
Air inlet connection: NW25
Exhaust connection: 1⁄4" NPT internal thread, rotatable (NW16 adapter provided)
Exhaust connection adapter: provide NW16 KF adapter
Gas ballast: 1⁄4 inch NPT internal thread (40 μm filter installed at the factory, port plug provided)
Operating voltage: 100-115 V, 200-240 V, 1Ø, 50/60Hz
Maximum line current: 200 V; 5 A 240 V; 4.2 A
Weight: with pump only: 26 kg (57 lbs)
Shipping weight: 34 kg (74 lbs)
Regulatory certification: CE, CSA/CUS

• Pumping speed 250 l/min
• Regardless of the grid frequency, the pump speed remains the same
• The optimal pumping speed can be selected by adjusting the pump speed through RS232 or 0-10V control signal
• Pump parameters can be monitored via serial interface
• Standard D shell connector provides contact closure for remote start and stop
• By choosing the best speed, the noise and vibration level in the workplace can be reduced, and the ultimate vacuum will not be reduced
• Adopts Agilent T-Plus software