UV-1601 Spectrophotometer, Shimadzu (CAT#: STEM-SPO-0353-ZJF)

The manufacturer of the UV-1601 Spectrophotometer is Shimadzu.
Refurbished Shimadzu UV 1601 Spectrophotometer (cat no 206-67001-92). Optional: Shimadzu CPS – 240A Cell Positioner (p/n 204-05837-92) with CPS controller (p/n 204-05837-92). The blazed holographic grating with self-aligning, energy-optimizing deuterium and tungsten-halogen lamps enhances precision across the UV-Vis spectrum and into the NIR from 190 to 1100nm. Spectral data is obtained at constant bandpass with resolution of less than 2nm. Superb attention to detail in the design of this instrument gives you all these features while maintaining an ultra-narrow beam of only 1 mm, allowing you to examine your smallest samples with confidence.
The Shimadzu UV-1601 UV-Vis spectrometer is used for transmission spectroscopy in the range from 190 nm to 1100 nm. There are two lamps used: a tungsten lamp that covers the region from 350 nm to 1100 nm, and a deuterium lamp that covers the region from 190 nm to 350 nm. The instrument can be used in a scanning spectrum mode, a kinetics mode, and a quantitative analysis mode. Data acquisition and processing is controlled through the Shimadzu UV-Probe software.

Condition: Refurbished, Certified Pre-owned
Wavelength range: 190-1100nm
Spectral Bandwidth: 2nm(5nm, 4nm, 1nm optional)
Wavelength accuracy: ±0.3nm
Wavelength Reproducibility: ≤0.15nm
Photometric System: Split-beam ratio monitoring; Auto scan; Dual detectors
Photometric Accuracy: ±0.3%T(0-100%T); ±0.002A(0-0.5A); ±0.004A(0.5A-1A)
Photometric Reproducibility: 0.2%T
Working Mode: T, A, C, E
Photometric Range: -0.3-3A
Stray Light: ≤0.1%T(NaI, 220nm, NaNO2 340nm)
Baseline Flatness: ±0.002A
Stability: ≤0.001A/h (at 500nm, after warming up)
Noise: ±0.001A( at 500nm, after warming up)
Display: 6 inches high light blue LCD
Detector: Silicon photo-diode
Power: AC 220V/50Hz, 110V/60Hz, 180W
Dimensions: 630×470× 210 mm
Weight: 26kg

Wide wavelength range, satisfying requirements of various fields.
The split-beam ratio monitoring system provides accurate measurements and enhances baseline stability.
Four options for spectral bandwidth selection, 5nm, 4nm, 2nm and 1nm , made according to customer's need and satisfying the requirements of pharmacopoeia.
Fully automated design, realizing easy measurement.
Optimized optics and large scale integrated circuits design, light source and receiver from world famous manufacturer all add up to high performance and reliability.
Rich measurement methods, wavelength scan, time scan, multi-wavelength determination, multi-order derivative determination, double-wavelength method and triple-wavelength method etc., meet different measurement requirements.
Automatic 10mm 8-cell holder, changeable to automatic 5mm-50mm 4-position cell holder for more choices.
Data output can be obtained via a printer port.
Parameters and data can be saved in case of power failure for user's convenience.
PC controlled measurement can be achieved via RS-232 interface (USB port) for more accurate and flexible requirement.

Spectra Academy SA Miniature UV-Vis Spectrometer, K-Mac
UV-2101PC Spectrophotometer, Shimadzu
UV-2501PC Spectrophotometer, Shimadzu