WIGGENS WCI-40T Three-Gas incubator, 42L, Shinetek Instruments Research Institute (CAT#: STEM-CC-3484-LGZ)

WIGGENS three-gas incubator is suitable for animal cell culture, germ cell culture and anaerobic cell culture. Suitable for microbial culture and incubation experiments, seed cultivation and tissue culture experiments.

Box volume: 42L
Temperature ℃-range: room temperature +5~60℃
Temperature ℃-display accuracy: ±0.1℃ (37℃)
Temperature ℃-resolution: 0.1℃
Temperature ℃-control mode: digital PID
CO2-range: 0% ~ 20%
CO2-Accuracy: ±0.1% (5% / 37℃ )
CO2-resolution: 0.1%
CO2-Sensor: Dual Beam Infrared CO2 Sensor
CO2-control: microcomputer control
CO2-inlet pressure range: 0.5~0.6bar
O2-range: 0.5~19%
O2-electrode: hydrogen dioxide electrode
Display: LED display, dual display
Operation panel: separate dual-channel keys
Jacket type: air jacket type (six-sided gradient heating)
Cavity material: stainless steel (304)
Number of Shelves (Standard/Z Large): 2/4
Internal dimensions (WxDxH) mm: 320x350x370
External dimensions (WxDxH) mm: 408x482x550
Weight (kg): 35

* Good air and humidity convection
Good air convection, good uniformity of temperature field. The side walls of the six-sided box are heated, and the air circulation fan is placed on the top of the accessory to ensure a good convection effect.
* Easy to clean
The rounded corner design is easy to clean, and the inner cavity is made of SUS304 stainless steel.
* Alarm system
When there is a deviation between CO2 and temperature, a buzzer alarm will be given.
* Shelf with holes
It is convenient for natural wind to flow, and the stainless steel material can effectively prevent corrosion and pollution.
* Temperature upper limit setting
When the temperature control fails, or the temperature at a certain point exceeds the set upper limit temperature, the device will automatically cut off the power to ensure the safety of the sample and the device itself.
* Partition door
Each floor has a separate partition door to facilitate separate experimental operations.
* Direct heating system on 6 sides
The entire side can be directly heated, ensuring a stable and uniform temperature, as well as rapid heating and temperature recovery. The heating chamber is divided into three sections, each monitored by individually calibrated temperature sensors.
* Air jacket
The heating wire is blocked between the cavity and the insulation layer, which helps to recover the temperature quickly and effectively reduces heat loss. Insulation requires no regular maintenance
* Double beam CO2 sensor
Quickly and accurately monitor CO2 levels, independent of temperature and humidity
* Water pan humidification
The heater heats the water pan at the bottom, creating moisture. Moisture is filled throughout the chamber by circulating fans.
* Non-condensing
The door has a heating unit, and the frame design of the entire incubator ensures that no condensation will form on the box and glass observation windows.
* Microcomputer PID control
Automatic control of CO2 concentration, temperature and alarm. Optional automatic sterilization function is available.
* HEPA air filter
Ensure the cleanliness of the gas in the incubator
* Optional feature
Automatic sterilization, oxygen content control, UV sterilization, O3 ozone sterilization unit, refrigeration function, etc.

WIGGENS WH-01 Mini Low Temperature Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3490-LGZ)
WIGGENS WCI-650 CO2 Incubator, 650L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3485-LGZ)
WIGGENS WCI-650CH Biotron Large CO2 Shaking Incubator, 650L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3486-LGZ)
WIGGENS WCI-850 CO2 Incubator, 850L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3487-LGZ)
WIGGENS WCI-850CH Biotron Large CO2 Shaking Incubator, 850L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3488-LGZ)
WIGGENS WCI-850T Three-Gas incubator, 850L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3489-LGZ)