WIGGENS WH-11C Low Temperature Biochemical Incubator, Shinetek Instruments Research Institute (CAT#: STEM-CC-3494-LGZ)

Effective volume: 150L
Temperature range: +4℃ ~ 60℃
Temperature accuracy (ATC calibration): <±0.1℃
Uniformity of temperature field: ±1℃ (37℃ )
Temperature controller: film button, digital display PID automatic adjustment
Material-Inner liner: stainless steel Shell: cold-rolled steel plate electrostatic spraying Shelf: stainless steel
Timer: Timing start, timing shutdown, timing alarm (1 minute ~ 99:59)
Temperature programming control: 9 segments + 99 cycles
Heating power: 450W
Cooling power: 350W
Power supply: AC 220~240V, 50/60Hz
Number of Partitions (Standard/Z Large): 2/5
Box size (WxDxH)mm: 550 x 500 x 610
Dimensions (WxDxH)mm: 660 x 605 x 1020
Net weight (kg): 95
Optional configuration: RS232 communication interface and software, test hole, power socket inside the box, top spotlight

Digital temperature setting and display, dynamic constant temperature control system, adjustable cooling capacity JQ, to ensure temperature stability and protection during the cultivation process.
Adopt high-quality compressor and green refrigerant, reliable performance, safety and environmental protection.
With a separate over-temperature protection device, the equipment uses Safety.
With timer (1 minute ~ 99 hours 59 minutes ), the start time and stop time can be preset.
Temperature programming control function: temperature programming can be divided into 6 segments, each segment can be set different temperature and time (Z maximum 99 hours 59 minutes), can be repeated 99 times, program data long-term memory, accidental pow er failure after the Restoration of the work can automatically continue to execute, to ensure the continuity of the test. When needed, it can be opened and used with /, and the temperature unit can be selected as ° C or OF.
When the temperature exceeds the set value or reaches the set value of overheating protection, the overheating alarm light will flash and an alarm sound will be issued, and the power will be turned off at the same time to stop heating.
The standard configuration is an insulating door with a hollow glass observation window, which has high safety performance, good heat insulation effect, and prevents condensation at low temperature.
Strong and durable door design, double seal, to ensure the airtight effect of the incubator, internal ventilation and circulation, even wind force, can protect small samples.
Stainless steel sprayed polyester liner and shelf: good ventilation, easy to clean, adjustable in height.
Bias correction function when temperature deviation occurs, easy to operate.
When the door is opened, the door indicator will light up and the fan and heater will stop, and an alarm will sound after one minute.
Optional temperature control software.

WIGGENS WH-650 Constant Temperature Incubator, 650L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3500-LGZ)
WIGGENS WH-1200 Constant Temperature Incubator, 1200L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3495-LGZ)
WIGGENS WH-15 Constant Temperature Incubator, 150L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3496-LGZ)
WIGGENS WH-21C Low Temperature Biochemical Incubator, Shinetek Instruments Research Institute (CAT#-STEM-CC-3497-LGZ)
WIGGENS WH-25 Constant Temperature Incubator, 260L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3498-LGZ)
WIGGENS WH-40C Low Temperature Biochemical Incubator, 400L, Shinetek Instruments Research Institute (CAT#-STEM-CC-3499-LGZ)