XJ Series Digestion Apparatus Digestion Unit, Split Design, XJ-II, 16 Holes. (CAT#: STEM-SPE-0022-TP)

XJ series digestion instrument is specially designed for laboratory. It is a good helper for sample heating digestion, acid distillation, boiling, and acid removal. It is also an ideal supporting product for analytical instruments such as atomic absorption and atomic fluorescence. Mainly used for trace analysis, isotope analysis and other high-end laboratories. It integrates the advantages of flat-panel electric heating plates, and has its own outstanding advantages. The recessed embedded design improves the efficiency of surrounding heating, which is more low-carbon and energy-saving compared with flat-panel heating.

Model: XJ-II
Number of holes: 16
Anti-corrosion performance: Surface Teflon coating, anti-corrosion
Temperature control method: PID temperature control
Temperature control accuracy: ±1℃
Material: Aluminum alloy, Teflon coating
Operating temperature: room temperature~260℃
Voltage: 220V/50Hz
Surface temperature difference: Surround heating, small temperature difference between holes
Continuous working time: 48h
Supporting products: inner tanks of various manufacturers, inner cups of digestion tanks, beakers, test tubes, crucibles, inner cups of digestion tanks, PFA sample dissolution tanks, etc.

1. High-quality PFA coating, one-touch clean, no rust, fast heating speed of Teflon anti-corrosion cast aluminum heating plate;
2. Working temperature: It can work continuously for 48 hours from room temperature to 260 °C, and it can be raised to 200 °C in 5-30 minutes (depending on the depth of the hole), and it can be heated to 200 °C within half an hour;
3. It can process a large amount of samples at one time and take a short time. Compared with the general hole-type digester that only relies on the plane heating and radiating facade, it can improve the work efficiency by 50%;
4. Surrounding heating, small temperature difference between holes, uniform heating, easy to use and long life;
5. The board surface and the control box can be made into separate parts, so that the acid mist during the experiment will not corrode the components in the control box, thereby increasing the service life, and multiple samples can be processed at the same time without cross-contamination;
6. Uniform digestion: the bottom of the vessel and the 360° wrapping heating make the sample heating without blind spots, with good stability and uniformity;
7. Time setting function can be added, segmented temperature control, that is, programmed temperature rise.