LyserPro Procedural Cryogenic Tissue Grinder, 100~1800 times/minute, Monad Biotech Co., Ltd. (CAT#: STEM-AI-0765-YJL)

LyserPro Procedural Cryogenic Tissue Grinder, 100~1800 times/minute, model LyserPro is manufactured by Monad Biotech Co., Ltd. LyserPro Programmed Frozen Tissue Crusher uses the principle of horizontal reciprocating oscillating ball milling. By configuring adapters, grinding jars and grinding beads of different volumes and materials, it performs high-frequency reciprocating vibration and impact with the sample to achieve the effect of fine grinding. The patented freezing adapter can withstand ultra-low temperature of -196℃, has long-term cold storage capacity, and the whole process of low-temperature grinding ensures the biological activity of the sample. The special inner wall design reduces the damage to the consumables during the low-temperature and high-speed grinding process, ensures the safety of the samples, and reduces the loss cost. The preset programmed grinding program does not require complex optimization, and can be called according to the sample type with one key, saving time and improving efficiency. It adopts continuous procedural grinding layer by layer, which solves the problem of difficult grinding samples such as high hardness, high fibrousness, and high toughness. The fully enclosed metal body design reduces operating noise and provides a clean experimental environment.

Cryogenic grinding method: patented low-temperature adapter, low-temperature crushing in the whole process
Sample handling: 24 2.0 ml sample tubes, 2 50 ml grinding jars
Cryogenic grinding function: 12×2 ml adapters can be taken out at -196℃ 1500 times/min for continuous crushing, and the temperature can be maintained below -31℃ for 15 minutes
Vibration frequency setting: 100~1800 times/minute, continuously adjustable
Parameter display mode: 7-inch LCD display
Noise: ≤65db
Single step single cycle crushing time setting: 1~990 seconds
Programming function: Up to 8 different vibration frequencies and grinding times can be set continuously
Typical crushing time: 2 min
Maximum injection size: ≤ 8 mm (2.0 ml sample tube)
Average broken particle: about 5 μm
Grinding type: dry grinding, wet grinding, cryogenic tube, cryogenic grinding
Side door: automatic shutdown when the safety door is opened
Drive: Brushless and maintenance-free motor with longer life
Main body material: all metal body
Power: 150W
Body size: 36(W)×18(H)×42(D) cm
Net weight: 26kg

Preset crushing program: preset progressive grinding programs for different samples, one-key call, no need to optimize;
Focus on low-temperature crushing: patented freezing adapter, strong cold storage capacity, low-temperature crushing throughout the process, providing low-temperature crushing for a long time, ensuring biological activity of samples, special inner wall design, protecting cryopreservation tubes, cherishing customer samples, and avoiding waste;
Extremely low operating noise: fully enclosed design, the instrument operates with extremely low noise;
Strong sample compatibility: flexibly handle hard, soft, brittle, elastic, fibrous samples;
Safe freezing operation: specially designed handle for liquid nitrogen freezing operation suitable for adapters and grinding jars, to protect the safety of operators and avoid frostbite;
Avoid cross-contamination: closed sample tubes and grinding tanks, no cross-contamination between samples of the same batch;
Side-opening door design: side-opening automatic sensor safety door design, the door-opening program automatically stops running, protecting the safety of the operator, saving space, and preventing pinching;
Avoid cross-contamination: closed sample tubes and grinding tanks, no cross-contamination between samples of the same batch.