Acquity Column Heater/Cooler, Waters (CAT#: STEM-CPO-0753-ZJF)

The manufacturer of the Acquity Column Heater/Cooler, Waters is Waters.
Refurbished Waters Acquity Column Heater/Cooler (p/n 186015008). Heating and cooling from 10 to 90 °C.

Condition: Refurbished, Certified Pre-owned
Set point temperature range: 10 to 90 °C
Compartment Operational temperature range : 15 °C below ambient to 90 °C; to a minimum of 10 °C
Compartment temperature measurement accuracy: ±1.0 °C; Temperature measured by an NIST traceable probe located next to the measurement sensor will be within the specification.
Column Compartment :
Column Manager: Accommodates up to four columns in parallel, 20 to 150 mm length X 2.1 to 4.6 mm ID, plus either a guard column or an in-line filter (30 mm maximum)
Column Heater/Cooler: Accommodates one column; serially connected columns can also be supported (up to four), 20 to 150 mm length X 1.0 to 4.6 mm ID, plus either a guard column or an in-line filter (30 mm maximum)
Valve Management (std): Two injector-style valves; 7 port, 6 position
Over temperature : Thermal switch shuts (switch opens) off heater at temperatures greater than 115 °C ±4.4 °C. Switch recloses at 100 °C ±3.3 °C.
Unattended Operation : Leak sensors, full 96-hour diagnostic data displayed through ACQUITY UPLC Console software

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Money back guarantee
Certified with warranty

Acquity Arc UHPLC System, Waters
Acquity Column Manager, Waters
Acquity ELS Detector, Waters