Dionex Thermostatted Column Compartment TCC-100, Thermo Fisher Scientific (CAT#: STEM-GLEPO-1722-ZJF)

The manufacturer of the Dionex Thermostatted Column Compartment TCC-100 is Thermo Fisher Scientific.
The Dionex Thermostatted Column Compartment TCC-100 is designed to perform equally well as a dependable system for routine analyses or as a sophisticated research instrument, especially for HPLC applications. The temperature can be set on the instrument itself, using the front panel controls or remotely, via Chromeleon. The design has been optimized for minimum dead volume and maximum efficiency.

Condition: Pre-owned
Environmental Conditions:
Range of use: Indoor use
Temperature: 10°C to 35°C (50°F to 95°F)
Air humidity: 40 to 85% rel. humidity, non-condensing
Overvoltage Category: II
Polution degree: 2
Operating Conditions:
Temperature range: +5°C to +85°C (+41°F to +185°F)
When cooling: max. 15°K from ambient
Temperature Setting: In 0.1°C increments
Temperature Accuracy: ± 0.5°C
Temperature Stability: ± 0.1°C
Temperature Precision: ± 0.1°C
Heat-up/Cool-down Time:
Less than 20 minutes from 20°C to 50°C
Less than 20 minutes from 50°C to 20°C
average change per minute: 2-4°K
Column Capacity: 3 columns (maximum length: 30 cm)
Control:
All functions controllable via LAN or USB
Permanent status transfer
Program-controlled by Chromeleon or stand-alone operation
Switching Valve:
Options: 2-position/6-port or 2-position/10-port switching valve
Maximum backpressure: 345 bar (5000 psi)
Switching time: 110 ms
Glp: When controlled by Chromeleon: Dionex AutoQ routines for Instrument Qualification Column identification system for 2 columns

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Certified with warranty

HTS PAL Autosampler Liquid Handler, CTC Analytics
UltiMate 3000 HPLC FLM-3100 Flow Manager, Dionex
Ekspert MicroLC 200 System, Eksigent Technologies