NST³ Nano Scratch Tester, 0.1 to 600 Scratch Speed, Anton Paar (CAT#: STEM-LE-1515-Y)

Highlights

True penetration depth measurements for elastic recovery studies;
Fast response time to small forces applied;
No compromises: Apply exactly the force you want;

Cat Number: STEM-LE-1515-Y

Application: The NST³ Nano Scratch Tester is particularly suitable for characterizing the actual scratch resistance and adhesion of films and coatings with typical thicknesses below 1000 nm.

Add to Cart

Description Specification Features Related Products

Description

The NST³ Nano Scratch Tester is manufactured by Anton Paar. The unique design of the Nano Scratch Tester includes two sensors for force and depth measurement associated with advanced piezoelectric actuators, providing excellent accuracy and flexibility.

Specification

Maximum load [mN]: 1000
Load resolution [μN] :0.01
Load noise floor [rms] [μN]: 0.1
Loading rate [N/min]: Up to 100
Depth resolution [nm]: 0.1
Depth noise floor [rms] [nm]: 1.5
Data acquisition rate [kHz] :192
Scratch speed [mm/min]: 0.1 to 600

Features

True penetration depth measurements for elastic recovery studies;
Fast response time to small forces applied;
No compromises: Apply exactly the force you want;
Multi-post-scan mode to measure the viscous behavior after a scratch;Access to full synchronized panorama for analysis whenever, wherever;

Related Products

MST³ Micro Scratch Tester, with "Follow Focus", Anton Paar (STEM-LE-1516-Y)
TORC 5000 - Thermo-optical Oscillating Refraction Characterization, 195 x 135 x 194mm, Anton Paar (STEM-LE-1519-Y)

Other recommended products

CAT²i Coating Thickness Measurement, 10 rpm to 3000 rpm Shaft Speed, Anton Paar (CAT#: STEM-LE-1555-Y)
TORC 5000 - Thermo-optical Oscillating Refraction Characterization, 195 x 135 x 194mm, Anton Paar (CAT#: STEM-LE-1519-Y)
CAT²c Coating Thickness Measurement, 10 rpm to 3000 rpm Shaft Speed, Anton Paar (CAT#: STEM-LE-1554-Y)
CAT²combo Coating Thickness Measurement, 10 rpm to 3000 rpm Shaft Speed, Anton Paar (CAT#: STEM-LE-1556-Y)
CboxQC CO₂ and O₂ Meter, 258 mm x 201 mm x 170 mm (L x W x H), Anton Paar (CAT#: STEM-LE-1551-Y)
OxyQC Wide Range O₂ Meter, ±20 ppb Repeatability s.d., Anton Paar (CAT#: STEM-LE-1553-Y)
CboxQC At-line Combined CO₂ and O₂ Meter, 262 mm x 209 mm x 176 mm(L x W x H), Anton Paar (CAT#: STEM-LE-1550-Y)
AQUALAB 4TE Water Activity Meter, ~5 min Read Time, AquaLab (CAT#: STEM-LE-1609-Y)