TFT color display, observable distance over 3m
* Display RPM/RCF, time, acceleration/deceleration digital (PCBS), with untrimmed positioning function (ULS)
* Speed control, step 10RPM/10xg
* RCF real-time display function based on actual use of the accessory.
* Countdown or countdown function, reaching the set RPM/RCF timing function to ensure the reproducibility of the experiment
* Timing is set from 1min-99h program, step 1s, with step-by-step and stop program function
* PCBS function: Progressive control acceleration and braking system up to 175 selectable slopes, preventing after separation
homogenization of the samples.
* ULS function: if there is an untrim situation, it will directly display the untrim position number of the rotor.
* 40 sets of program memory with password protection function
* There are different prompt sounds and screen information prompts to display the operation of the device in real time
Safety
* Safety system for the centrifuge cover
- Automatic locking lid, mechanical double lock
- Emergency cover unlock function
- Lock cover protection during operation
- Protection against sudden drop of cover
- Sight holes in the cover for operation inspection
* If there is no balance check, it will automatically stop
* There is an Anquan protective layer between the centrifugal chamber and the shell
* The centrifuge chamber is made of stainless steel (easy to clean)
* The rotor is removable when the cover is closed
* Both rotor and adapter are autoclavable for easy installation
* Forced internal air flow can reduce temperature increase
* Energy saving setting with automatic power off option setting
Easy to use
* Microcomputer program control
* Brushless maintenance-free motor
* Rotor and adapter memory function
* Noise level, below 60dB
* With start, stop, cover opening and instantaneous centrifugation functions
* Speed can be adjusted by RPM/RCF during operation.
* It can be set to automatically open the cover through the program
* Automatically memorize the parameter setting value after Z
* Automatic rotor recognition, overspeed protection
Refrigeration
* After centrifugation, keep cooling
* Pre-cooling and with rotor selection function
* In the case of maximum speed, it can maintain a constant temperature of 4°C
* Temperature range -20°C — 40°C, temperature step adjustment 1°C
* The temperature sensor is in the centrifuge chamber, feedback the temperature in the chamber
* R449A environmentally friendly refrigerant (CFC-free)
MAGNUS 22R
EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Implementing regulations: (EC) 1005/2009, (EU) 517/2014.
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.