Shinetek MAGNUS 22R Large Capacity Floor Standing Centrifuge, 540 x 650 x 930mm, Shinetek Instruments Research Institute (CAT#: STEM-LC-3105-LGZ)

Maximum load capacity: 4 x750ml; Maximum centrifugal force/speed: 21948xg / 14300RPM
MAGNUS 22R desktop centrifuge is widely used in laboratories, research and development centers, biotechnology, quality control, medical and other fields. Ergonomic design, easy to remove and install the rotor. The unbalanced point recognition function can directly locate the unbalanced point, which is convenient to use. The maximum volume of centrifugation can reach 750ml, which can be used in microwell plates, cell culture plates, and centrifuge tubes of various specifications. TFT color touch display information, can be used for programming control. Through programming control, the operation can be programmed for parameter setting, start-up setting, etc., and the operation process is traceable. The refrigeration system makes it possible to keep the minimum temperature of the cabinet below 4°C when using the best rotor and operating speed.

Dimensions w x d x h mm: 540 x 650 x 930
Net weight Kg:145
Voltage V:220-230
Current Hz: 50-60
Power W:1050
Max Advisable(Hz): <|0.446|

TFT color display, observable distance over 3m
* Display RPM/RCF, time, acceleration/deceleration digital (PCBS), with untrimmed positioning function (ULS)
* Speed control, step 10RPM/10xg
* RCF real-time display function based on actual use of the accessory.
* Countdown or countdown function, reaching the set RPM/RCF timing function to ensure the reproducibility of the experiment
* Timing is set from 1min-99h program, step 1s, with step-by-step and stop program function
* PCBS function: Progressive control acceleration and braking system up to 175 selectable slopes, preventing after separation
homogenization of the samples.
* ULS function: if there is an untrim situation, it will directly display the untrim position number of the rotor.
* 40 sets of program memory with password protection function
* There are different prompt sounds and screen information prompts to display the operation of the device in real time

Safety
* Safety system for the centrifuge cover
- Automatic locking lid, mechanical double lock
- Emergency cover unlock function
- Lock cover protection during operation
- Protection against sudden drop of cover
- Sight holes in the cover for operation inspection
* If there is no balance check, it will automatically stop
* There is an Anquan protective layer between the centrifugal chamber and the shell
* The centrifuge chamber is made of stainless steel (easy to clean)
* The rotor is removable when the cover is closed
* Both rotor and adapter are autoclavable for easy installation
* Forced internal air flow can reduce temperature increase
* Energy saving setting with automatic power off option setting

Easy to use
* Microcomputer program control
* Brushless maintenance-free motor
* Rotor and adapter memory function
* Noise level, below 60dB
* With start, stop, cover opening and instantaneous centrifugation functions
* Speed can be adjusted by RPM/RCF during operation.
* It can be set to automatically open the cover through the program
* Automatically memorize the parameter setting value after Z
* Automatic rotor recognition, overspeed protection

Refrigeration
* After centrifugation, keep cooling
* Pre-cooling and with rotor selection function
* In the case of maximum speed, it can maintain a constant temperature of 4°C
* Temperature range -20°C — 40°C, temperature step adjustment 1°C
* The temperature sensor is in the centrifuge chamber, feedback the temperature in the chamber
* R449A environmentally friendly refrigerant (CFC-free)

MAGNUS 22R
EU certification: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Implementing regulations: (EC) 1005/2009, (EU) 517/2014.
Executive standard: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.

Shinetek Digtor 22 C-U Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3100-LGZ)
Shinetek DIGICEN 21R Program Control Centrifuge, Shinetek Instruments Research Institute (CAT#-STEM-LC-3095-LGZ)
Shinetek Digtor 21 col Benchtop Centrifuge (Life Science), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3096-LGZ)
Shinetek DIGTOR 22 Benchtop Centrifuge, 540 x 650 x 390mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3097-LGZ)
Shinetek Digtor 22 C Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3098-LGZ)
Shinetek Digtor 22 C-8 Benchtop Centrifuge (Industrial Use), 540 x 650 x 400mm, Shinetek Instruments Research Institute (CAT#-STEM-LC-3099-LGZ)