Speed Regulation Glass Reactor, Dimensions 1270W x 810D x 2400H mm, 100L (CAT#: STEM-GLE-0827-LGH)

Mainly used for material synthesis, distillation, concentration and other experiments. The tank structure is divided into three types: single layer, double layer and three layers. According to need, the kettle can be pumped to negative pressure to meet the experimental conditions.

Effective volume in the kettle (L): 100
Tank body jacket volume (L): about 30.0
Heat transfer area of condenser (m²): about 0.954
Feeding bottle volume (L): 10
Volume of recycled bottle (L): 20
Stir insert hole: 60# flange
Temperature sensor insertion hole: 35# flange
Condenser connection port: 50# standard ball port
Liquid feeding port: 34# standard grinding port ×2
Feeding bottle interface: 40# standard grinding mouth
Solid feed port: 95# flange port
Glass assembly: high borosilicate glass 3.3
Main frame: SUS304
Movement mode: casters can be locked
Operating temperature (℃): -80 ~ 200
Limit of temperature difference inside and outside the kettle (℃): ≤80
Pressure in the kettle (MPa) : -0.1 ~ 0.0
Jacket pressure (MPa) : ≤+0.03
Vacuum system boost rate: ≤2kPa/h
Stirring motor power (W) : 250
Speed regulation mode: frequency conversion speed regulation
Speed adjustment range (RPM) : 50 to 500
Temperature sensor type: Pt100
Temperature display accuracy (℃) : ±0.1
Stainless steel insulation hose connection specification: 3/4 external thread
Seal material: polytetrafluoroethylene
Discharge valve installation height (mm) : about 380
Stirring paddle: paddle type stirring paddle
Power supply: 220-240V ~,50/60Hz
Ambient temperature (℃): 5 ~ 35
Ambient relative humidity (%): ≤ 65
Overall dimensions (mm): about 1270W x 810D x 2400H
Net weight (kg) : 119
Tank layer: single/double/three
Type: Conventional /CE/ explosion-proof

Mainly used for material synthesis, distillation, concentration and other experiments. The tank structure is divided into three types: single layer, double layer and three layers. According to need, the kettle can be pumped to negative pressure to meet the experimental conditions.