Waters Acquity Binary Solvent Manager UPLC Binary Solvent Manager, Waters Corporation (CAT#: STEM-C-0130-LGZ)

The manufacturer of Waters Acquity Binary Solvent Manager UPLC Binary Solvent Manager is Waters Corporation. Model is Acquity Binary Solvent Manager UPLC Binary Solvent Manager. The overall design of the Waters™ ACQUITY™ UPLC™ I-Class PLUS System is an investigational analysis for maximum peak capacity, throughput and sensitivity, ideal for running any ms-based application. The system includes a binary solvent manager (BSM) and a sample manager with flow needle (SM-FTN-I); this configuration provides excellent carryover performance.

Condition: used
Number of solvents: Up to four: in any combination of two: Al or A2 and Bl or B2
Solvent storage: Solvents Tray accommodates up to four chromatographic solvents, two Sample Manager wash solvents and one Binary Solvent Manager seal wash solvent
Solvent conditioning: Vacuum degassing (Six-channel): one channel per solvent, and two channels for Sample Manager wash solvents
Operating flow rate range: 010 to 2.000 mL/min, in 0.001 mL increments
Compressibility compensation: Automatic and continuous
Effective system delay volume: <120 ulL, independent of system backpressure (with standard 50-ilL mixer installed)
Plunger seal wash: Integral, active, programmable
Gradient profiles: Eleven gradient curves [including linear, step (2), concave (4), and convex (4)]
Wet prime: Automatic
Maximum operating pressure: 15,000 psi up to 1 mL/min, 9,000 psi up to 2 mL/min per pump, not more than 15,000 psi total
Composition accuracy:
±0.5% absolute (full scale) from 5 to 95% of flow rates
from 0.5 to 2.0 mLlmin (Contact Waters for conditions used)
Composition precision: 0.15% RSO or ±0.04 min SO, whichever is greater, based on retention time
Flow precision: 0.075% RSO or ±0.02 min SO, six replicates, based on retention time or volumetric measures (0.500 to 2.000 ml/min)
Flow accuracy: ± 1.0% at 0.5 mL/min with degassed methanol, per Waters AQT/SystemsQT protocol
Primary wetted materials: 316 stainless steel, UHMWPE, sapphire, ruby, FEP, PTFE, ETFE, diamond-like coating, PEEK and PEEK alloys, titanium alloys
Unattended operation: Leak sensors, full diagnostic data captured through console software

1. Narrow peak widths provide higher resolution and more efficient ionization for improved mass spectrometry sensitivity.
2. Ultra-low latency results in exceptionally fast analysis times.
3. Increased sensitivity through industry-leading carryover performance.
4. Multidimensional UPLC configuration leads to improved sample characterization through selective isolation.
5. The ACQUITY UPLC I-Class PLUS System is the ideal entry point for mass spectrometry, maximizing the analytical value of every analysis. With the ability to rapidly implement high-resolution and high-sensitivity methods, the answers you seek are obtained not only very quickly, but with new levels of clarity to enhance characterization of even the most complex samples.

Agilent 1100 Series - G1322A HPLC Degasser, Agilent Technologies(CAT#-STEM-C-0040-LGZ)
Agilent 1100 Series - G1323A HPLC Communication Module, Agilent Technologies(CAT#-STEM-C-0041-LGZ)
Agilent 1100 Series - G1323B HPLC Communication Module, Agilent Technologies(CAT#-STEM-C-0042-LGZ)
Agilent 1100 Series - G1330A HPLC Autosampler Chiller / Thermostat, Agilent Technologies(CAT#-STEM-C-0044-LGZ)
Agilent 1100 Series - G1330B HPLC Autosampler Chiller / Thermostat, Agilent Technologies(CAT#-STEM-C-0045-LGZ)
Agilent 1100 Series - G1379A HPLC Degasser, Agilent Technologies(CAT#-STEM-C-0055-LGZ)