2410 Refractive Index Detector, Waters (CAT#: STEM-CPO-0712-ZJF)

The manufacturer of the 2410 Refractive Index Detector, Waters is Waters.
Refurbished Waters 2410 RID differential refractive index detector (available part numbers: WAT053958 & 800000104) designed for high performance liquid chromatography applications. The Waters 2410 Differential Refractometer uses optical refraction to monitor the concentrations of sample components in your eluent. The 2410 detector functions with solvents with refractive indices between 1.00 and 1.75.

Condition: Refurbished, Certified Pre-owned
RI Range: 1.00 to 1.75 RIU
Measurement Range:
5 × 10–3 RIU maximum FS (SENS = 1, SF = 1)
5 × 10–8 RIU minimum FS (SENS = 1024, SF = 100)
Flow Rate: 0.03 to 10 mL/min
Noise (after one hour warm-up): ≤ 2.0 × 10–8 RIU, (TC = 1, SF = 80, SENS = 64, THF at 24 °C with restrictor coil)
Drift: 2.5 × 10–7 RIU/hr (static with THF) TC = 1, SF = 20, SENS = 32
Sensitivity Settings: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024
Time Constant Filter Settings: 0.2, 1, 3, 10 seconds
Analog Outputs: –2.0 V to +2.0 V
Temperature Control:
Internal oven: 30 to 50 °C (86 to 122 °F)
External column heaters:
Ambient to 150 °C (302 °F), steel
Ambient to 80 °C (176 °F), plastic
Light Source: Light emitting diode (LED)
Flow Cell: Fused quartz
Cell Volume: 10 µL
Pressure Limit: 100 psi
Fluidic Path Materials: 316 stainless steel, Dynasil®, Suprasil II®, PTFE, Kalrez®, quartz

Patented countercurrent heat exchanger and temperature-controlled cell for stable operation under varying conditions
Auto zero and auto purge for automated operation
Built-in pressure relief to protect flow cell
Auto diagnostics
Two external column heater controls
Battery backup to retain parameter settings when the detector is powered off or during power interruptions
Long-life LED light source

1525u Binary Pump, Waters
2414 Refractive Index Detector, Waters
2424 Evaporative Light Scattering (ELS) Detector, Waters