Acquity UPLC System with TUV & Column Manager, Waters Corporation (CAT#: STEM-CPO-0822-ZJF)

The manufacturer of the Acquity UPLC System With TUV & Column Manager is Waters Corporation.
Designed for advanced analytical and separation applications, Waters Acquity UPLC System with TUV and Column Manager is a high-performance liquid chromatography system. Compared to traditional HPLC systems, this state-of-the-art system uses ultra-high-pressure liquid chromatography (UPLC) technology for faster separations, enhanced resolution, and improved sensitivity.
This system features a TUV detector with excellent sensitivity and a wide linear range, making it ideal for quantitative analysis. For enhanced reproducibility and flexibility, Column Manager provides automated column selection, phase selection, and temperature control.

Condition: Pre-owned
Solvent Manager:
Number of solvents: Up to four, in any combination of two: A1 or A2 and B1 or B2.
Solvent conditioning: Vacuum degassing (six-channel): one channel per solvent, and two channels for sample manager wash solvents.
Settable flow rate range: 0.001 to 2.000 mL/min, in 0.001 mL increments
Gradient profiles: Eleven gradient curves Wet prime Automatic
Maximum operating pressure: 103,421 kPa (1034 bar, 15,000 psi) up to 1 L/min, 62,053 kPa (621 bar, 9000 psi) up to 2 mL/min
Composition accuracy: ±0.5% absolute (full scale) from 5 to 95% from 0.50 to 2.00 mL/mina
Composition precision: 0.15% RSD or ±0.04 min SD
Flow accuracy: ±1.0% at 0.5 mL/min
Sample Manager:
Number of SBS/ANSI sample plates:
Total of two plates, expandable to up to 22 plates with optional sample organizer.
Maximum of 22 microtiter plates, 11 intermediate-depth plates, or 8 deep-well (or 2 mL vial) plates:
96 and 384 microtiter plates
48-position 2 mL vial plates
48-position 0.65 mL micro-centrifuge tube plates
24-position 1.5 mL micro-centrifuge tube plates
Maximum sample capacity: 768 in two 384-well plates; expandable to up to 8,448 samples with optional sample organizer
Injection volume range:
0.1 to 50 µL, in 0.1 µL increments,
partial or full loop mode, 10 µL loop is
standard; 1, 2, 5, 20, and 50 µL loops
Sample temperature control: 4 to 40 °C, programmable in 0.1 °C increments
Minimum sample required: 5 µL residual volume at a needle offset of 0, or 22 µL at the preset 2 mm needle offset
Column Heater:
Columns accepted: Any up to 4.6 mm ID and 150mm long
Temperature range: 5 above ambient to 65°C (9 above ambient to 194°F)
PDA Detector:
Wavelength Range: 190-500 nm
Flow Cell Options:
Analytical Cell 500 nanoliters, 10 mm pathlength
High Sensitivity Cell 2.4 microliters, 25mm pathlength
Dimensions: 25 x 14 x 34”
Power: 100-240v, 50/60 Hz

Includes:
Waters Acquity UPLC System with TUV & Column Manager
Waters Acquity Tray
Waters Acquity TUV Detector
Waters Acquity Column Manager
Waters Acquity Sample Manager
Waters Acquity Binary Solvent Manager
Data System
In-house Warranty Coverage

Refurbished to meet manufacturer's specification
In excellent condition
Thoroughly cleaned
Certified with warranty

Acquity UPLC System with PDA, Waters Corporation
Acquity UPLC System with TUV Detector, Waters Corporation
Mettler Toledo XP603S Excellence Plus Precision Balance, Mettler Toledo