Agilent 1200 Series - G1316A HPLC Column Compartment, Agilent Technologies (CAT#: STEM-C-0069-LGZ)

The manufacturer of Agilent 1200 Series - G1316A HPLC Column Compartment is Agilent Technologies. Model is 1200 Series - G1316A. The Agilent 1200 G1316A Colcom thermostatted column compartment includes two heat exchangers for solvent preheating, an automated column identification module, and a CAN cable. The compact size of the compartment conveniently fits into a single Agilent 1200 Series HPLC stack. The temperature range of the G1316A is 10 to 80 °C below ambient temperature, and the temperature stability is ±0.15 °C. The Agilent G1316A has a column capacity of three 30 cm columns and can take advantage of a temperature accuracy of ±0.8 °C. The heating/cooling time of G1316A from ambient temperature to 40 °C is 5 minutes. The colcom has many safety and maintenance protocols such as extensive diagnostics, error detection and display, leak detection, safe leak handling, leak output signal for pumping system shutdown, and low voltage in major maintenance areas.

Condition: used
Detection type: 1024-element photodiode array
Light source: Deuterium and tungsten lamps
Wavelength range: 190 – 950 nm
Short term noise (ASTM) Single and Multi-Wavelength: ± 1 × 10-5AU at 254 and 750 nm
Drift: 2 × 10-3AU/hr at 254 nm
Linear absorbance Range: 2 AU (upper limit)
Wavelength accuracy: ± 1 nm
Wavelength bunching: 1 – 400 nm
Slit width: 1, 2, 4 , 8, 16 nm
Diode width: < 1 nm
Flow cells
Standard: 13 µl volume, 10 mm cell path length and 120 bar (1760 psi) pressure maximum
Semi-Micro: 5 µl volume, 6 mm cell path length and 120 bar (1760 psi) pressure maximum
High pressure: 1.7 µl volume, 6 mm cellpath length and 400 bar (5880 psi) pressure maximum
500 nano: 0.5 µl volume, 10 mm cell path length and 50 bar (725 psi) pressure maximum
Control and data Evaluation: Agilent ChemStation for LC
Analog outputs: Recorder/integrator: 100 mV or 1 V, output range 0.001 – 2 AU, two outputs
Communications: Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional
Safety and maintenance: Extensive diagnostics, error detection and display (through control module and ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas.
GLP features: Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter

1. Maximum temperature stability and application flexibility for cooling and heating.
2. The spacious column holder accommodates three columns with a total length of 30 cm.
3. Optional 2-position/6-port on-off valve for 600 bar operation.
4. Simultaneous identification of two columns results in faster operation and reduced laboratory costs.
5. Separate heat exchangers with settable values are available for two different temperature zones.
6. Small internal volume contribution of only 9 μL, low dispersion.
7. Temperature range: 10 degrees below ambient temperature to 80°C.
8. Temperature Stability: ±0.15°C
9. Temperature Accuracy: ±0.8°C, calibrated ±0.5°C
10. Column capacity: 3 30cm columns

Waters Column Water Heater HPLC Column Compartment, Waters Corporation(CAT#-STEM-C-0184-LGZ)
Rheodyne EV500-104 Column Selector, Rheodyne(CAT#-STEM-C-0194-LGZ)
Thermo Hot Pocket HPLC Column Compartment, Thermo Fisher Scientific(CAT#-STEM-C-0214-LGZ)
Perseptive Biosystems Scout Column Selector, Perseptive Biosystems(CAT#-STEM-C-0271-LGZ)
Waters TCM HPLC Column Compartment, Waters(CAT#-STEM-C-0285-LGZ)
Waters Temperature Control Module II HPLC Column Compartment, Waters(CAT#-STEM-C-0286-LGZ)