Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Analysis of Flow Properties of Pharmaceutical Powders by Near Infrared (NIR) Spectroscopy (CAT#: STEM-ST-1455-CJ)

Introduction

The physical properties of pharmaceutical powders are of upmost importance in the pharmaceutical industry. The knowledge of their flow properties is of critical significance in operations such as blending, tablet compression, capsule filling, transportation, and in scale-up operations. Powders flow properties are measured using a number of parameters such as, angle of repose, compressibility index (Carr's index) and Hausner ratio. Near infrared spectroscopy is a fast and low-cost analytical technique thoroughly used in the pharmaceutical industry in the quantification and qualification of products.




Principle

Near-infrared spectroscopy (NIRS) is a method that uses light between the visible and infrared wavelength ranges (approximately 800 – 2500 nm) and measures the absorption of light as a function of wavelength. The near-infrared light that interacts with the sample has specific wavelengths that are absorbed based on certain chemical bonds (e.g. C-H, O-H, S-H, and N-H) being present in the sample.

Applications

Biomedical; Biopharmaceuticals

Procedure

1. Prepare samples.
2. Place the sample in the Near Infrared Spectroscopy.
2. Analyze data and identify samples.

Materials

• Sample: Molecules with C-H, O-H, S-H, and/or N-H bonds (Such as: Proteins, Peptide, Water, Alcohol, Fats, Oils, Hydrocarbons); Volatile Organics; Moisture; Fatty Acids; Solids; Carbohydrate; Liquids, Pastes; Tablets; Capsules, etc.
• Equipment: Near Infrared (NIR) Spectroscopy

Notes

1. NIR is non-destructive, and requires little or no sample preparation.
2. NIR reflectance spectra can be used to quickly determine a material’s properties without altering the sample.
3. NIR can depending on wavelength penetrate up to 20 mm of a sample which makes NIR more effective for solid samples.
4. FTIR spectroscopy is, in principle, very similar to Near Infrared (NIR) spectroscopy, but works at longer wavelengths where the chemical information from the samples is more specific.
Advertisement