Barnstead NANOpure DIamond Ultrapure Water System, Barnstead International (CAT#: STEM-GLEPO-1274-ZJF)

The manufacturer of the Barnstead NANOpure DIamond Ultrapure Water System is Barnstead International.
The Nanopure Diamond water system is a standard unit for most laboratories. The perfect system for your most sensitive analytical procedures including; Atomic Absorption AA, ICP and ICP/MS and Ion Chromatography IC. 
The pre-owned products will be thoroughly cleaned and fully tested to perform at manufacturer specifications before shipping.

Condition: Certified Pre-Owned
Irradiated Fibre Filter
Power: 100-240v, 100w, 50/60hz, 1ph
Resistivity: 18.2MΩ·cm
Conductivity: 0.055 µS/cm
Feedwater Source: Pretreated
Flow Rate: Up to 2L/hr.
Total Organic Carbon: Without TOC monitoring
Bacterial Content: <1 CFU/mL
Particles: >0.2µM/mL <1 µM/mL
TOC Monitor with UV Intensity Monitoring: No
Feed Water Monitoring: No
Feedwater Pressure: 100psig (6.9 Bar)
Height (English): 19.5 in.
Height (Metric): 49.5cm
Width (English): 13.5 in.
Width (Metric): 34.3cm
Length (English): 17.5 in.
Length (Metric): 44.5cm
Voltage: 100-240V
Hertz: 50/60Hz
Inlet Water Temperature (English): 40° to 104°F
Inlet Water Temperature (Metric): 4° to 40°C
Model: Standard
Phase: 1
Type: Analytical
Certifications/Compliance: Produces water that exceeds ASTM™, ISO 3696 and CLSI-CLRW Type I water requirements. CE, CSA
Dimensions (L x W x H): 17.5 x 13.5 x 19.5 in. (44.5 x 34.3 x 49.5cm)
Electrical Requirements: 100-240V 50/60Hz

Pure and continuous source of water
In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Millipore Elix Lab Water Purification System, Millipore
Millipore Elix 10 Water Purification System, Millipore
Millipore Milli-Q Gradient A10 Water Purification System, Millipore
ELGA Veolia Purification Packs, ELGA LabWater