Beckman Avanti J-26XP Centrifuge, 26,000 RPM, Beckman Coulter (CAT#: STEM-LCPO-0062-LGZ)

The Beckman Avanti® J-26XP high performance centrifuge is a fast and specially designed solution for processing up to 6 liters in less than 10 minutes. This Beckman centrifuge is crafted to perform a wide range of separations and has proven to effectively replace the work of two or three older instruments. The Avanti® J-26XP is capable of delivering subcellular fractions at 82,000 x g, running 24 microplates at a time, and separating viable cell populations by elution.

The ergonomic design of the Avanti® J-26XP allows for faster and more convenient centrifuge processing. Using high torque, switched reluctance (SR) drive technology, the J-26 XP reduces cycle times and latency. Additionally, the Friction Reduction System (FRS) included in the Avanti® range of centrifuges reduces energy consumption and allows the instrument to run quieter and faster.

Integrated with a full line of rotors, adapters, and sample carriers, the Avanti® J-26XP centrifuge provides superior versatility and efficient centrifugation. Additionally, the system reduces manual sample handling with the Harvest Line System liner, thereby improving biosecurity and storage.

The Beckman Avanti® J-26XPI Centrifuge is an enhanced version of this model that incorporates all the features of the Avanti J-26XP plus advanced features including SpinTrace® software compatibility, regional rotor capabilities and 12 acceleration/deceleration rates.

Additional safety features of the Beckman Avanti® J-26XP centrifuge include a fully sealed barrier, enhanced biosecurity and automatic rotor identification.

Condition: certified pre-owned
Accel/Decel Rates: 2/3
Dimensions: 886 cm (with door closed) x 86 cm x 71 cm (34 in x 34 in x 28 in)
Weight: 290 kg (640 lb)
Set Temperature Range (1 degree increments): -10 to 40°C
Maximum Speed/g-Force: 26,000 rpm/82,000 x g
Temperature Control: + 2° of set temperature
Speed Control: + 10 rpm of set speed or 0.1%, whichever is greater
Ambient Temperature Range: 16° to 38°C
Drive Type / Cooling: SR* Drive / Air Cooled
Refrigeration System: Non-CFC, non-ozone depleting refrigerant
Power Usage / Heat Output: 2.0 kW / 6900 Btu/hr
Sound Level: –
Clearances Required: 7.6 cm (3.0 in) sides; 16.0 cm (6.25 in) rear
Door: 6.1 cm (2.4 in) thick structural foam with steel plate
Humidity Restrictions: < 95% (noncondensing)
Pollution Degree: 2
Rotor Chamber Diameter: 51.3 cm (20 in)
Time – Actual Display: Indicates run time remaining (timed run) or elapsed time (hold run)

Beckman Coulter L-100XP Ultracentrifuge, 100,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0097-LGZ)
Beckman Coulter Optima TLX-120 Ultracentrifuge, 5,000 to 120,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0098-LGZ)
Beckman Coulter Optima XPN-100 Ultracentrifuge, 100,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0099-LGZ)
Beckman Coulter XE-90K Ultracentrifuge, 485 kg, Beckman Coulter (CAT#-STEM-LCPO-0100-LGZ)
Beckman L-80XP Ultracentrifuge, 1,000 to 80,000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0101-LGZ)
Beckman L8-70M Ultracentrifuge, 1000-7000 RPM, Beckman Coulter (CAT#-STEM-LCPO-0102-LGZ)