BeyoGold™ Vacuum Filters, 0.22µm, PES, 500ml Bottle Top, Model FVF025-1pc, Beyotime (CAT#: STEM-L-1816-LKN)

BeyoGold? Vacuum Filters, 0.22μm, PES, 500ml Bottle Top, model FVF025-1pc is manufactured by Beyotime. This product is a disposable vacuum filtration device, which must be used in conjunction with a vacuum pump to provide a pressure difference. Equipped with a high-quality polyethersulfone (PES) filtration membrane with a membrane pore size of 0.22μm, a filtration diameter of 90mm, and an effective membrane area of ??64cm2, it has the characteristics of extremely high flow rate and extremely low protein adsorption. Compared with mixed cellulose esters (MCE) and nylon (Nylon) membranes, it can provide a very high flow rate and very low protein adsorption and leaching. The filtration speed is 30%-40% faster than similar products. It is commonly used for filtering and sterilizing large-volume media, serum, buffers, additives and other solutions that are not suitable for autoclaving. The sample processing volume can reach several liters, and the filtered sample can be directly stored in a sterile receiving bottle or other appropriate container.

Packaging: 1 per bag.

Contains:
Polyethersulfone filter membrane.
A Transparent Bottle top: 500ml, made of polystyrene (PS) with a connector.

Performance Parameters:
Membrane material: Polyethersulfone (PES).
Membrane pore size: 0.22μm.
Filter diameter: 90mm.
Effective membrane area: 64cm2.
Flow rate: 33.5-43.5ml/min/cm2 (25°C, pure water, 10 psi);.
25.5-37.5: ml/min/cm2 (25°C, 3% TSB, 10 psi).
Total flux: Up to 1200 ml.
Infiltration: Hydrophilic.
Sterility: Yes.
High flow rate: Yes.
Packaging: γ-ray sterilization, individually packaged.
Connector color: Green.
Neck bottle unit size: Φ45mm (standard blue cap bottle diameter).
Connector outlet: Plug-on Hose Barb.
Receiving bottle material: Polystyrene (PS).
Receiving bottle cap material: Polyethylene (PE).
Maximum pressure of vacuum pump: 0.06Mpa.
Maximum operating temperature: 70°C.
Sample type: Aqueous, Solvents and harsh liquids according to chemical compatibility.
pH range: 6.0-8.0.
Dissolution test: HPLC certified.
Endotoxin content: <0.25EU/ml or <2.15EU/Unit (LAL test).
Clean certification: Passed ISO9000 highest standard certification.
Sterilization filtration efficiency: LRV>7.
Bacteria retention efficiency: 99.99999%.

Features:
Convenient and readily available.
High flow rate and high throughput, economical and efficient.
Low protein adsorption, low elution, and extremely low endotoxin content.
Gamma ray irradiation sterilization.
The multi-column membrane support system that facilitates the rapid flow of liquid provides a uniform filtering effect between the contact points with the membrane to minimize the gap stress and maintain the best flow.
Sterilization filtration efficiency: LRV>7.
Lightweight and strong outer wall structure, easy to grasp.
The spacious standard GL45 bottle mouth can ensure that liquid samples are poured effectively and firmly.
Compatible with cleaning agents and tissue culture, and the membrane is hot-melted to achieve the maximum flow, which can reduce bubbles and prevent denaturation.

Storage:
Store at room temperature, valid for at least two years.

Precautions:
This vacuum filter cup is a single-use product, and it is not recommended to reuse it, so as to prevent the residue of one sample from being carried to the next sample. However, if the same sample is processed, it can be reused 2-3 times appropriately.
This vacuum filter cup cannot be sterilized by high temperature and high pressure.
The material of the receiving bottle of this vacuum filter cup is Polystyrene (PS), and its chemical compatibility refers to the PS chemical compatibility table.
If necessary, filter operations can be carried out in a biological safety cabinet or ultra-clean workbench.
This product is limited to scientific research by professionals, and must not be used for clinical diagnosis or treatment, or used for food or medicine, and must not be stored in ordinary residences.
For your safety and health, please wear lab coats and disposable gloves.

BeyoGold? Vacuum Filters, 0.22μm, PES, 500ml Bottle Top/500ml Receiver Flask, Model FVF021-1pc, Beyotime (CAT#: STEM-L-1814-LKN)
BeyoGold? Vacuum Filters, 0.22μm, PES, 500ml Bottle Top/500ml Receiver Flask, Model FVF021-12pcs, Beyotime (CAT#: STEM-L-1815-LKN)
BeyoGold? Vacuum Filters, 0.22μm, PES, 500ml Bottle Top, Model FVF025-1pc, Beyotime (CAT#: STEM-L-1816-LKN)
BeyoGold? Vacuum Filters, 0.22μm, PES, 500ml Bottle Top, Model FVF025-24pcs, Beyotime (CAT#: STEM-L-1817-LKN)