BILON-9000Y High-Speed Centrifugal Spray Dryer (5L), 25000 RPM, BiLon (CAT#: STEM-GMAE-3049-LGZ)

Spray drying is the most widely used process in the liquid process forming and drying industry. Ideal for producing powdered, granular or bulk solid products from solutions, emulsions, suspensions and plastic pasty liquid raw materials. Therefore, when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet precise criteria. Spray drying is an ideal process. The drying speed is fast, and the surface area of the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated instantly, and the drying time is only a few seconds, especially for the drying of heat-sensitive materials. The product has good uniformity, fluidity and solubility, high product purity and good quality. The production process is simplified and the operation control is convenient. For liquids with a moisture content of 40-60% (special materials can reach 90%), it can be dried into powder products at one time. After drying, there is no need to pulverize and screen, reducing production processes and improving product purity. The particle size, bulk density and water content of the product can be adjusted by changing the operating conditions within a certain range, and the control and management are very convenient.

Transmission form of centrifugal spray head: compressed air transmission
Speed: 25000rpm
Atomizing disc diameter: 50mm
Powder discharge: particle size range 5-80 microns
Inlet air temperature control: 140～350°C
Air outlet temperature: 80～90°C
Evaporated water: 5Kg/H
Maximum feed volume: up to 5L/H (adjustable)
Dry powder recovery rate: ≥95%
Heating power: 9.0KW
Appearance (length, width and height): 180X95X220cm
Body material:
Material general description is defined as stainless steel material

1. Color LCD touch screen parameter display: air inlet temperature / air outlet temperature / peristaltic pump speed / air volume / needle frequency.
2. Equipped with a nozzle cleaner (through the needle), when the nozzle is blocked, it will be automatically cleared, and the frequency of the through needle can be adjusted automatically.
3. The particle size of the finished dry powder after drying is relatively uniform, and more than 95% of the dry powder is in the same particle size range.
4. For viscous materials, there is a nozzle cleaner (through needle), which will be automatically removed when the nozzle is blocked, and the frequency of needle through can be automatically adjusted.

ZPG-100 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 100 kg/h, BiLon(CAT#-STEM-GMAE-3040-LGZ)
ZPG-150 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 150 kg/h, BiLon(CAT#-STEM-GMAE-3041-LGZ)
ZPG-200 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 200 kg/h, BiLon(CAT#-STEM-GMAE-3042-LGZ)
ZPG-300 Special Spray Dryer For Traditional Chinese Medicine Extract, Water Evaporation 300 kg/h, BiLon(CAT#-STEM-GMAE-3043-LGZ)
BILON-SD25L Production Spray Dryer, Maximum Speed 18000 RPM, BiLon(CAT#-STEM-GMAE-3044-LGZ)
BILON-SD50L Production Spray Dryer, Maximum Speed 18000 RPM, BiLon(CAT#-STEM-GMAE-3045-LGZ)