BILON-T-1002S Low Temperature Coolant Circulation Pump 10 L, BiLon (CAT#: STEM-GLE-3511-LGZ)

BILON® brand T series low-temperature coolant circulation device uses a compressor for refrigeration, and then conducts heat exchange with the circulating liquid to reduce the temperature of the circulating liquid and sends it out through a circulating pump. At the same time, the temperature controller is used for temperature control, which has three functions of constant temperature, cooling and circulation.

Temperature range (°C): -10 to room temperature
Temperature control method: start and stop
Tank volume (L): 10
Maximum flow (L/min): 20
Circulation method: outer circulation
Liner size (cm): ∮25×25
Highest Young (M): 10
20°C cooling (W): 800
Power requirements: 220V 50HZ

1. Original imported compressor with high efficiency.
2. Install casters for more convenient movement.
3. Light touch keys for easy operation.
4. Equipped with a lower water outlet to facilitate the renewal of the medium.
5. With parameter memory, call self-recovery function.
6. The inner tank is stainless steel, which is clean, hygienic, beautiful and corrosion-resistant.
7. Side air intake and side air exhaust, rounded corner design to prevent accidental injury.
8. The barrel-type liner is adopted, the circulation is more uniform and there is no dead angle, and there is no coil inside the experimental tank, making full use of the space in the tank.

SC-10C Constant Temperature Oil Bath, 6 L/min, BiLon(CAT#-STEM-GLE-3603-LGZ)
SC-15A Constant Temperature Oil Bath, Internal Circulation, BiLon(CAT#-STEM-GLE-3604-LGZ)
SC-15B Constant Temperature Oil Bath, 6 L/min, BiLon(CAT#-STEM-GLE-3605-LGZ)
SC-25A Constant Temperature Oil Bath, Internal Circulation, BiLon(CAT#-STEM-GLE-3606-LGZ)
SC-25B Constant Temperature Oil Bath, 6 L/min, BiLon(CAT#-STEM-GLE-3607-LGZ)
SC-30A Constant Temperature Oil Bath, Internal Circulation, BiLon(CAT#-STEM-GLE-3608-LGZ)