Biochemical Incubator, Digital Tube Display, Dimensions 54×57×107cm, 81L (CAT#: STEM-GLE-0948-LGH)

1. The inner box is equipped with a fan to form a micro-air flow circulation and improve the temperature uniformity in the box.
2. P.I.D. temperature controller displayed by LED digital tube, precise temperature control;Continuous operation or timing operation: 0~9999min;With parameter memory function, it will automatically resume operation after incoming calls.
3. Cubigel refrigeration compressor, high efficiency, low consumption, fluorine-free and environmentally friendly refrigerant.
4. Independent external temperature protection device.
5. Outer box material: cold-rolled steel surface sprayed with plastic, inner material: SUS304 stainless steel plate.
6. The inner box is designed with a circular arc structure, which is easy to clean.
7. The movable shelf can be pulled out, and the spacing can be adjusted.
8. Installed with casters, easy to move.
9. The inner box is equipped with a lighting device, which is convenient for observation.
10. The box is equipped with a power socket, which can provide power for other small instruments such as BOD detection equipment and oscillators erected in the incubator.
11. Meet the electromagnetic compatibility requirements of GB/T 18268.1-2010 electrical equipment for measurement, control and laboratory use.

Temperature range: 5℃to 50℃
Temperature uniformity: ±2℃
Temperature fluctuation: ±1℃
Circulation mode in the box: breeze stirring mode
Temperature display accuracy: 0.1℃
Temperature control accuracy: ±0.1℃
Alarm type: overtemperature alarm, temperature probe damage alarm
Internal dimensions W×D×H (cm) : 40×37×55
Internal kiln volume (L) : 81
External dimensions W×D×H (cm) : 54×57×107
Shelf: 2
Power (W) : 260
Power supply: 1Ø 220V 50Hz
Note: ※ Performance parameter test Under no-load condition, the ambient temperature is 20℃ and the ambient humidity is 50%RH. ※ Cannot be used for long-term storage in cold storage

1. The inner box is equipped with a fan to form a micro-air flow circulation and improve the temperature uniformity in the box.
2. P.I.D. temperature controller displayed by LED digital tube, precise temperature control;Continuous operation or timing operation: 0~9999min;With parameter memory function, it will automatically resume operation after incoming calls.
3. Cubigel refrigeration compressor, high efficiency, low consumption, fluorine-free and environmentally friendly refrigerant.
4. Independent external temperature protection device.
5. Outer box material: cold-rolled steel surface sprayed with plastic, inner material: SUS304 stainless steel plate.
6. The inner box is designed with a circular arc structure, which is easy to clean.
7. The movable shelf can be pulled out, and the spacing can be adjusted.
8. Installed with casters, easy to move.
9. The inner box is equipped with a lighting device, which is convenient for observation.
10. The box is equipped with a power socket, which can provide power for other small instruments such as BOD detection equipment and oscillators erected in the incubator.
11. Meet the electromagnetic compatibility requirements of GB/T 18268.1-2010 electrical equipment for measurement, control and laboratory use.