Boutique Artificial Climate Box, Dimensions 1025×810×1735mm, 412L (CAT#: STEM-GLE-1087-LGH)

1. Wide-screen LCD display: It is convenient to set programs and observe temperature and humidity, fan speed, running time, etc., with temperature and humidity and water level alarm functions (logo and sound prompt).
2. Over-temperature protection device: If the set high temperature range is exceeded, the operation will be automatically interrupted, and the sound and light alarm will protect the safety of the sample and the experimental environment.
3. USB access port: used to connect to a printer or to a U disk to record the temperature and humidity data during the experiment in real time.
4. Independent ventilation fan: The heat generated by the refrigeration compressor and electrical control process is discharged in time.
5. 40mm diameter test hole: convenient for monitoring; equipped with silicone soft plug, which can be used to isolate air convection.
6. German-American style exterior door handle: 90° rotating design, 4-point forced locking box door: stronger sealing, no air leakage, better thermal insulation performance.
7. Outer box: using high-quality cold-rolled steel plate + powder spray technology, uniform thickness, simple and beautiful.
8. Shelf: Made of SUS304 stainless steel, the shelf can be adjusted according to the required height.
9. Square steel base: It is welded with rectangular square steel, which has high strength, is more durable, and is stable and does not shake.
10. Clapboard type light stand: The layered light uniformity is high, and the vertical light source is more suitable for plant growth; the configured plant growth light has a sound color spectrum.
11. Universal casters: can be freely steered and locked; polyurethane material, good wear resistance.

Convection mode: forced convection (balanced)
Temperature control range: 0 ℃ to 50 ℃ without light, 5 ℃ to 50 ℃ with light
Humidity control range (relative humidity) : 30%-90% RH
Temperature resolution: 0.1℃
Temperature fluctuation: ±0.8℃
Humidity deviation: ± 3% RH to ± 5% RH
Light intensity control (five levels adjustable) (can be customized for special requirements of light intensity control) : 450μmol/㎡/s
Clapboard lamp holder: two layers
Operating temperature: RT+5℃ ~ 30℃
Dimensions: 1025×810×1735
Internal dimensions: 560×530×1390
Internal volume: 412L
Number of standard trays: 3
Installation power: 2875W
Operating power: 575W
Power supply voltage: ac-220 v 50HZ
Note: The above technical data are measured under the conditions of ambient temperature +25℃, relative humidity 50%RH, set temperature and humidity 23℃/60%RH, and no load in the box.
Safety protection: Refrigeration system: compressor overheating, overcurrent, overpressure protection, condensing fan overheating protection
Others: total power supply phase sequence and lack of phase protection, leakage and short circuit protection, overload protection, water shortage protection

1. Wide-screen LCD display: It is convenient to set programs and observe temperature and humidity, fan speed, running time, etc., with temperature and humidity and water level alarm functions (logo and sound prompt).
2. Over-temperature protection device: If the set high temperature range is exceeded, the operation will be automatically interrupted, and the sound and light alarm will protect the safety of the sample and the experimental environment.
3. USB access port: used to connect to a printer or to a U disk to record the temperature and humidity data during the experiment in real time.
4. Independent ventilation fan: The heat generated by the refrigeration compressor and electrical control process is discharged in time.
5. 40mm diameter test hole: convenient for monitoring; equipped with silicone soft plug, which can be used to isolate air convection.
6. German-American style exterior door handle: 90° rotating design, 4-point forced locking box door: stronger sealing, no air leakage, better thermal insulation performance.
7. Outer box: using high-quality cold-rolled steel plate + powder spray technology, uniform thickness, simple and beautiful.
8. Shelf: Made of SUS304 stainless steel, the shelf can be adjusted according to the required height.
9. Square steel base: It is welded with rectangular square steel, which has high strength, is more durable, and is stable and does not shake.
10. Clapboard type light stand: The layered light uniformity is high, and the vertical light source is more suitable for plant growth; the configured plant growth light has a sound color spectrum.
11. Universal casters: can be freely steered and locked; polyurethane material, good wear resistance.