BTH-286 Constant Temperature And Humidity Incubator, 742 x 645 x 1630, BiLon (CAT#: STEM-CC-3022-LGZ)

It has the function of displaying the humidity in the box, which can display the humidity in the box in real time.

Internal Dimensions (Volume): 600 x 477 x 1000(286L)
Dimensions: 742 x 645 x 1630
Viewing window: 400 x 600 x 30
Test hole (Φmm): 50 (on the right side)
Number of Doors: 1
Number of Shelves (Standard/Max): 5 / 10
Maximum load per shelf: 25kg
Temperature range (°C): 5～65
Temperature deviation at 37°C: ±0.3°C
Temperature fluctuation at 37: ±0.2°C
Heating time to 37°C: 5min
Temperature Recovery Time: 2
Humidity range: 20 ~ 95%RH (see temperature and humidity control chart for details)
Humidity fluctuation: +2/-3 %RH (60%RH at 25°C)
Humidity recovery time (min): 15 (after opening the door at 25°C60%RH for 30S)
Controller display: 5 inch LCD true color touch screen
Programming function: 32 segments X 36 groups
Timing function: 0-999 hours 59 minutes
Running function: fixed value running, program running, timing automatic stop running, scheduled automatic start running
Temperature control mode: PID
Temperature and humidity detection: AM2321B
Voltage: single phase AC 220V 50Hz
Rated power (KW): 2.0
Equipment safety device: 15A
Safety protection device: Refrigerator overload, over-current protection, temperature over-temperature protection, water shortage protection, system self-test loop

1. Refrigeration method: compressor refrigeration.
2. Air circulation mode: the fan is forced to circulate, and the temperature in the box is evenly distributed.
3. Super large insulating glass observation window, good heat insulation effect, large viewing angle inside the box.
4. The inner box is all made of SUS 304 stainless steel, which is corrosion-resistant.
5. The control system adopts the touch screen LCD control system, the operation is simple and clear.
6. Power failure memory function, can continue to run after power failure recovery.

LBTH-1000 Artificial Climate Box, 400 x 600 x 30, BiLon(CAT#-STEM-CC-3016-LGZ)
MBTH-136 Mould Incubator, 642 x 580 x 1335, BiLon(CAT#-STEM-CC-3017-LGZ)
MBTH-286 Mould Incubator, 742 x 645 x 1630, BiLon(CAT#-STEM-CC-3018-LGZ)
MBTH-500 Mould Incubator, 810 x 975 x 1680, BiLon(CAT#-STEM-CC-3019-LGZ)
MBTH-1000 Mould Incubator, 1270 x 1020 x 1980, BiLon(CAT#-STEM-CC-3020-LGZ)
BTH-136 Constant Temperature And Humidity Incubator, 642 x 580 x 1335, BiLon(CAT#-STEM-CC-3021-LGZ)