Carbon Dioxide Cell Incubator,Air Jacket, 160L

Description

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO8 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Specification

External material: cold rolled steel plate surface spray plastic
Interior material: stainless steel plate
Outer door: cold rolled steel plate surface sprayed with plastic
Inner door: tempered glass
Insulation: centrifugal glass wool board
Temperature control range: room temperature +3 ℃ to 60 ℃
(Ambient temperature 5℃ ~35℃)
Temperature control mode: PID control mode
Heating mode: WJ-2: water jacket type;
Wj-3: Water jacket/air jacket
Circulation mode in the box: breeze stirring mode
Temperature fluctuation: ≤ ±0.2℃
Temperature uniformity: ≤ ±0.3℃
Timing range: continuous operation without timing or 1 to 9999 minutes
CO2 concentration control range: 0~20%
CO2 control mode: WJ-2 series: valve type;
Wj-3 series: Imported infrared sensor solenoid valve open
Close the way
Humidification method: natural evaporation of the humidified water pan
Sterilization method: UV sterilization UV
Alarm function: overtemperature alarm, temperature probe damage alarm,
Water shortage alarm, CO2 concentration alarm (WJ-3 series),
CO2 cutoff Alarm (WJ-3 series)

Features

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO8 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Other recommended products

Being Instruments BIO-190RHP CO2 Incubator, Being Instruments (CAT#: STEM-CC-2175-LGZ)
KB 115 Cooling Incubator, -10 °C to 100 °C Temperature Range, BINDER Inc. (CAT#: STEM-LE-1699-Y)
Mould Incubator BJPX-M200, Biobase (CAT#: STEM-GLE-1405-LKN)
Low Temperature Incubator MINC038, 500L, -40-65℃, STE-Mart (CAT#: STEM-CC-3673-LC)
BS-Ⅱ Type Heated Incubators, Dimensions 68x58x81cm, 300W (CAT#: STEM-GLE-1166-LGH)
MKF 115 Dynamic Climate Chamber, 115 L Internal Volume, BINDER Inc. (CAT#: STEM-LE-1708-Y)
Waterproof Electric Heating Constant Temperature Incubator, Dimensions 79x69x90cm, 440W (CAT#: STEM-GLE-1201-LGH)
Biochemical Incubator (BOD Incubator), Model DW-LBI-800-N, DRAWELL (CAT#: STEM-CC-0036-CJ)

Carbon Dioxide Cell Incubator,Air Jacket, 160L (CAT#: STEM-GLE-0937-LGH)

Highlights

Description

Specification

Features

Other recommended products