Carbon Dioxide Cell Incubator,Air Jacket, 80L

Description

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO9 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Specification

External material: cold rolled steel plate surface spray plastic
Interior material: stainless steel plate
Outer door: cold rolled steel plate surface sprayed with plastic
Inner door: tempered glass
Insulation: centrifugal glass wool board
Temperature control range: room temperature +3 ℃ to 60 ℃
(Ambient temperature 5℃ ~35℃)
Temperature control mode: PID control mode
Heating mode: WJ-2: water jacket type;
Wj-3: Water jacket/air jacket
Circulation mode in the box: breeze stirring mode
Temperature fluctuation: ≤ ±0.2℃
Temperature uniformity: ≤ ±0.3℃
Timing range: continuous operation without timing or 1 to 9999 minutes
CO2 concentration control range: 0~20%
CO2 control mode: WJ-2 series: valve type;
Wj-3 series: Imported infrared sensor solenoid valve open
Close the way
Humidification method: natural evaporation of the humidified water pan
Sterilization method: UV sterilization UV
Alarm function: overtemperature alarm, temperature probe damage alarm,
Water shortage alarm, CO2 concentration alarm (WJ-3 series),
CO2 cutoff Alarm (WJ-3 series)

Features

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO9 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Other recommended products

Grace Bio-Labs CoverWell^™ Incubation Chambers, Chamber Volume 200 μL, Grace Bio-Labs, Inc. (CAT#: STEM-CC-0161-LC)
Medium Upright Incubator Shaker, 84 x 60 x 106 cm, Amerex Instruments, Inc. (CAT#: STEM-LE-1313-Y)
Shinetek W6011814 Partition Glass Door, Shinetek Instruments Research Institute (CAT#: STEM-CC-3340-LGZ)
Hot Box System, Dual Flow Meter, Billups-Rothenberg Inc. (CAT#: STEM-LE-1676-Y)
Lab-Line L-C Incubator 203 Incubator, Labline Instruments (CAT#: STEM-CC-0346-LGZ)
INCUMAX™ Incubator, +8°C above ambient to 80°C, 68 x 74 x 135cm, Amerex Instruments, Inc. (CAT#: STEM-LE-1308-Y)
Carbon Dioxide Cell Incubator, HH. CP - 01 (Gas), Overall Dimensions 770×630×810 mm, Internal Size 550×500×650 mm, 550 W, 160 L， Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0363-LGH)
Electro-Thermal Constant Temperature Incubator MINC007, 45L, STE-Mart (CAT#: STEM-CC-3568-LC)

Carbon Dioxide Cell Incubator,Air Jacket, 80L (CAT#: STEM-GLE-0938-LGH)

Highlights

Description

Specification

Features

Other recommended products