Carbon Dioxide Cell Incubator,Air Jacket, Breeze Stirring Mode, 80L

Description

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO11 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Specification

External material: cold rolled steel plate surface spray plastic
Interior material: stainless steel plate
Outer door: cold rolled steel plate surface sprayed with plastic
Inner door: tempered glass
Insulation: centrifugal glass wool board
Temperature control range: room temperature +3 ℃to 60 ℃
(Ambient temperature 5℃ ~35℃)
Temperature control mode: PID control mode
Heating mode: WJ-2: water jacket type;
Wj-3: Water jacket/air jacket
Circulation mode in the box: breeze stirring mode
Temperature fluctuation: ≤ ±0.2℃
Temperature uniformity: ≤ ±0.3℃
Timing range: continuous operation without timing or 1 to 9999 minutes
CO2 concentration control range: 0~20%
CO2 control mode: WJ-2 series: valve type;
Wj-3 series: Imported infrared sensor solenoid valve open
Close the way
Humidification method: natural evaporation of the humidified water pan
Sterilization method: UV sterilization UV
Alarm function: overtemperature alarm, temperature probe damage alarm,
Water shortage alarm, CO2 concentration alarm (WJ-3 series),
CO2 cutoff Alarm (WJ-3 series)

Features

The water jacket or air jacket structure is adopted, and the studio is made of high-quality stainless steel;
When the door is opened, the fan is automatically turned off (WJ-3 type closes the CO11 inlet valve at the same time) and the heating is stopped to reduce the pollution caused by the entry of air. The temperature adopts microcomputer data analysis and intelligent P.I.D control, which has high precision and strong anti-interference ability. And three probes are used to control the temperature of the box, the temperature of the water and the temperature of the door, so that the temperature of the studio has high precision and small fluctuations. (The air jacket type is a double probe, which controls the temperature of the box and the door separately)
Light touch adjustment switch, light and flexible. The displayed and set parameters are all digitally displayed, and each working state has LED indication
It has various protection functions such as over-temperature, water shortage, and gas cut-off to ensure the safe operation of the equipment
UV sterilization lamps are used to reduce contamination
Natural evaporation and humidification to maintain a better humidity in the studio

Other recommended products

WIGGENS WS-300R Constant Temperature Shaking Incubator, 53L, Shinetek Instruments Research Institute (CAT#: STEM-CC-3509-LGZ)
Thermo Scientific Forma Steri-Cycle i160 CO2 Incubator, Thermo Fisher Scientific (CAT#: STEM-CC-2199-LGZ)
Shinetek W6011806 UV Germicidal Lamp, Shinetek Instruments Research Institute (CAT#: STEM-CC-3332-LGZ)
Mildew Incubator MINC025, 70L, STE-Mart (CAT#: STEM-CC-3603-LC)
Water Jacketed CO2 Incubator NWCI-101, LABNICS EQUIPMENT LTD. (CAT#: STEM-CC-3203-LC)
Illumination Incubator MINC033, 80L, STE-Mart (CAT#: STEM-CC-3643-LC)
Illumination Incubator MINC030, 150L, STE-Mart (CAT#: STEM-CC-3627-LC)
KB 240 Cooling Incubator, -10 °C to 100 °C Temperature Range, BINDER Inc. (CAT#: STEM-LE-1700-Y)

Carbon Dioxide Cell Incubator,Air Jacket, Breeze Stirring Mode, 80L (CAT#: STEM-GLE-0940-LGH)

Highlights

Description

Specification

Features

Other recommended products