Carbon Dioxide Cell Incubator, Digital Tube Display, Dimensions 57×59×85mm, 550W (CAT#: STEM-GLE-0930-LGH)

1. The water jacket structure is adopted, and the heat preservation is strong.
2. The inner box is equipped with a fan to form a micro-air flow circulation, which improves the uniformity of temperature and CO2 concentration in the box.
3. Equipped with a door switch, when the box door is opened, the fan, CO2 inlet valve and heating are automatically turned off to reduce the pollution of the box caused by the entry of outside air, and reduce the loss of electricity and gas.
4. P.I.D. temperature controller with LED display, accurate temperature control, using three sets of temperature probes to control the box temperature, water temperature and door temperature respectively, appropriate door temperature control helps the water vapor on the tempered glass inner door to condense and reduce the temperature inside the box. chance of contamination.
5. WJ-3 series adopts imported infrared carbon dioxide sensor, which is not affected by temperature and humidity changes, and is suitable for occasions where doors are frequently opened and closed.
6. Independent external temperature protection device.
7. Outer box material: cold-rolled steel surface sprayed with plastic, internal material: SUS304 stainless steel plate.
8. Meet the electromagnetic compatibility requirements of GB/T 18268.1-2010 electrical equipment for measurement, control and laboratory use.

Temperature range: Room temperature +5 ℃to 60 ℃
Temperature uniformity: ≤±0.5℃
Temperature fluctuation: ≤±0.5℃
Humidity: 85% RH or higher
Humidification method: the humidifier plate evaporates naturally after adding water
Heating mode: four-sided water jacket heating mode
Circulation mode in the box: breeze stirring mode
Sterilization method: UV sterilization UV
Carbon dioxide concentration control range: 0~20%
Temperature display accuracy: 0.1℃
Temperature control accuracy: ±0.1℃
Concentration display accuracy: ±0.1%
Concentration control accuracy: ±0.1%
Fluctuation of carbon dioxide concentration: ≤±0.1%
Carbon dioxide concentration control mode: infrared concentration sensor + solenoid valve start and stop mode
Alarm type: overtemperature alarm, temperature probe damage alarm, water shortage alarm, carbon dioxide concentration alarm
Internal dimensions W×D×H (cm) : 41×40.5×51
Internal volume (L) : 84
External dimensions W×D×H (cm) : 57×59×85
Shelf: 2
Power (W) : 550
Power supply: 1Ø 220V 50Hz

1. The water jacket structure is adopted, and the heat preservation is strong.
2. The inner box is equipped with a fan to form a micro-air flow circulation, which improves the uniformity of temperature and CO2 concentration in the box.
3. Equipped with a door switch, when the box door is opened, the fan, CO2 inlet valve and heating are automatically turned off to reduce the pollution of the box caused by the entry of outside air, and reduce the loss of electricity and gas.
4. P.I.D. temperature controller with LED display, accurate temperature control, using three sets of temperature probes to control the box temperature, water temperature and door temperature respectively, appropriate door temperature control helps the water vapor on the tempered glass inner door to condense and reduce the temperature inside the box. chance of contamination.
5. WJ-3 series adopts imported infrared carbon dioxide sensor, which is not affected by temperature and humidity changes, and is suitable for occasions where doors are frequently opened and closed.
6. Independent external temperature protection device.
7. Outer box material: cold-rolled steel surface sprayed with plastic, internal material: SUS304 stainless steel plate.
8. Meet the electromagnetic compatibility requirements of GB/T 18268.1-2010 electrical equipment for measurement, control and laboratory use.