Carbon Dioxide Cell Incubator, HH. CP - 7 (Gas), Overall Dimensions 760×530×550 mm, Internal Size 500×400×400 mm, 350 W, 80 L， Shanghai Boxun Medical Biological Instrument Corp. (CAT#: STEM-GLE-0364-LGH)

Carbon Dioxide Cell Incubator, HH.CP-7(Gas), Shanghai Boxun Medical Biological Instrument Corp.
1. The shell is made of cold rolled steel plate, the surface is electrostatic sprayed, the inner tank mirror is stainless steel, the baffle can be adjusted arbitrarily;
2. High brightness LCD display, intelligent control, can simultaneously display temperature, carbon dioxide concentration;
3. Temperature control with over-temperature acousto-optic alarm function;
4. With 90℃ high temperature high temperature disinfection function;
5. Using high efficiency filter: diameter is greater than or equal to 0.3μm particles, filter effect up to 99.998%;
6. Selection of centrifugal fan, low noise, longer life, with a reasonable air duct structure, the incubator heating fast and good uniformity;
7. The chip automatic suppression control is adopted to control the establishment of double temperature sensors in the system, which can effectively avoid the large temperature fluctuation caused by opening the box door during the culture process.
8. The humidity sensor can display the humidity in real time.
9.Temperature control with over-temperature acousto-optic alarm function;
10. The door heating control system can effectively avoid the condensation phenomenon of the inner glass door;
11. Special manufacturing process to ensure the tightness of the cavity, ensure that the concentration of long time automatic maintenance;
12. RS-485 interface is standard;
13. It has the function of parameter memory and call recovery to protect data loss caused by power failure and crash.

Power supply voltage: AC 220V±10%/50Hz±2%
Input power: ≤350W
Heating mode: air sleeve type
Temperature control range: room temperature +5℃-60℃
Temperature resolution: 0.1℃
Temperature fluctuation: <±0.5℃
Temperature uniformity: <±0.8℃
CO2 control range: 0-20%
CO2 control mode: valve type
CO2 recovery time: ≤ concentration value X1.2min
Humidification method: natural evaporation
Volume: 80 L
Liner size (mm) : 500×400×400
Dimensions (mm) : 760×530×550

High brightness LCD display, intelligent control, can simultaneously display temperature, carbon dioxide concentration;
Temperature control with over-temperature acousto-optic alarm function;
With 90℃ high temperature high temperature disinfection function;