Central experimental platform with steel and wood structure, E1 grade particle board, FENGJ (CAT#: STEM-LF-0045-LJX)

The steel-wood experimental bench refers to the experimental bench made of steel and wood. It is mainly used to carry experimental equipment and provide convenience for the experiment.

1. Cabinet material: 18mm thick E1 grade particleboard, With high-quality melamine board on the outside.
2. C-shaped steel frame: 60×40 mm steel pipe, Wall thickness 1.2mm. The steel pipe is produced and treated with EPOXY spraying
3. Coating thickness: The surface of all steel plates of the experimental bench is sprayed with epoxy resin electrostatic powder. The spraying is uniform and the thickness is not less than 50μM (±5%).
4. Movable back panel: In order to facilitate pipeline installation and maintenance, The cabinet back panel is designed with a maintenance port, And the upper sealing plate is a movable back panel.
5. Cabinet drawer: PVC hidden handle, Each drawer has a silent limit function, The load-bearing capacity is more than 35kg, 18mm thick E1 grade particle board is used, And high-quality melamine board is pasted on the outside
6. Cabinet door panel: Made of 18mm thick E1 grade particle board, With high-quality fireproof board on the outside.

Equipped with eyewash station, Faucet, Sink, PP drip rack
Wear-resistant and anti-corrosion
Fireproof

PP central test bench FENGJ, 3000*1500*800, FENGJ (CAT#-STEM-LF-0051-LJX)
All-timber structure central test bench, Solid physical and chemical board, FENGJ (CAT#-STEM-LF-0046-LJX)
Stainless steel central laboratory bench, Stainless steel, FENGJ (CAT#-STEM-LF-0047-LJX)
Stainless steel table top all steel laboratory bench, Stainless steel, FENGJ (CAT#-STEM-LF-0048-LJX)
PP experimental side table, 3000*1500*800, FENGJ (CAT#-STEM-LF-0049-LJX)
PP central test bench, 4500*1500*800mm, FENGJ (CAT#-STEM-LF-0050-LJX)