Chroma 63106A In Rochester, NY, USA (CAT#: STEM-GLEPO-0641-YJL)

Chroma 63106A In Rochester, NY, USA, model 63106A, is manufactured by Chroma power supplies.
The 63106A is a 600 watt DC electronic load module from Chroma. Simulate loading on an electronic circuit including power supply testing, ATE applications, LED testing, and more.
The Chroma 63106A Programmable DC Electronic Load is ideal for the test and evaluation of multi-output AC/DC power supplies, DC/DC converters, chargers and power electronic components. It is designed for applications in research and development, production, and incoming inspection. The system is configured by plugging the user selectable load modules into the system mainframe. The user interfaces include an ergonomically designed user friendly keypad on the front panel and the following computer interfaces: RS-232, USB or GPIB.
The 6310A series offers 8 different modules with power ratings from 100 watts to 1,200 watts, current ratings from 0.5mA to 240A, and voltage ratings from 0.5mV to 500V. The loads can be operated in constant current, constant voltage, constant power and constant resistance and may be placed in parallel for increased current and power.
The 6310A series can simulate a wide range of dynamic loading applications. The waveforms programmable parameters include: slew rate, load level, duration and conducting voltage. In addition, up to 100 sets of system operating status can be stored in EEPROM and recalled instantly for automated testing applications.
Real time measurement of voltage and current are integrated into each 6310A load module using a 16-bit precision measurement circuit. The user can perform on line voltage measurements and adjustments or simulate short circuit test using the user friendly keypad on the front panel. Additionally, the 6310A series offers an optional remote controller for automated production lines.
The 6310A series has a self-diagnosis routines to maintain instrument performance. It also provides OP, OC, OV, OT, and reverse polarity protection to guarantee quality and reliability for even in the most demanding engineering testing and ATE applications.

Condition: Used
Max. voltage: 80.0V
Number of outputs: Single
Max. current: 150.00A

Wide range 0~600V operating voltage
Compatibility between 6310 and 6310A
Up to eight channels in one mainframe, for testing multiple output SMPS
Parallel load modules up to 1400W for high current and power applications
Synchronization with multiple loads
Flexible CC, CR, CP and CV operation modes
Dynamic loading with speeds up to 20 kHz
Fast response of 0.32mA/µs ~ 10A/µs slew rate
Minimum input resistance allows load to sink high current at low voltage (63123A: 0.6 Volts at 70 Amps)
Real time power supply load transient response simulation and output measurements
User programmable 100 sequences. Front panel input status for user-friendly operation
High/Low limits of testing parameters to test GO/NG
Digital I/O control
Over current protection (OCP) testing function
16-bit precision voltage and current measurement with dual-range
Remote sensing capability
Short circuit test
Self-test at power-on
USB, GPIB & RS-232C interfaces
Applications:
Constant Current Mode
Constant Resistance Mode
Constant Voltage Mode
Constant Power Mode

Bio-Rad PowerPac Basic PowerSupply In Fall River, MA, USA (CAT#: STEM-GLEPO-0626-YJL)
Bio-Rad 200 2.0 Power Supply In Fall River, MA, USA (CAT#: STEM-GLEPO-0627-YJL)
Chroma Systems Solutions, 63600-5, Mainframe, Unit Powers On In Burnsville, MN, USA (CAT#: STEM-GLEPO-0631-YJL)
Chroma Systems Solutions, 63630-600-15, DC Electronic Load Module, Powers On In Burnsville, MN, USA (CAT#: STEM-GLEPO-0632-YJL)
Chroma Systems Solutions, 63610-80-20, DC Electronic Load Module, Dual Channel In Burnsville, MN, USA (CAT#: STEM-GLEPO-0633-YJL)
Chroma Systems Solutions 63610-80-20 DC Electronic Load Module Dual Channel In Burnsville, MN, USA (CAT#: STEM-GLEPO-0634-YJL)