Cole Palmer 52000-40 In Farmingdale, NJ, USA (CAT#: STEM-GLEPO-0869-YJL)

Cole Palmer 52000-40 In Farmingdale, NJ, USA, model 52000-40, is manufactured by Cole-Parmer environmental chambers.
The oven chamber is heated by two electric resistance heaters located beneath the chamber. The chamber insulation is 3 inches of fiberglass. The temperature is controlled by an automatic microprocessor controller using a R.T.D.sensor. The controller is located above the oven chamber and is insulated from the oven chamber. These ovens incorporate a fan with a permanently lubricated motor to circulate the heated air through the chamber.
The oven is equipped with an adjustable Over Temperature Protection (OTP) and sensor break protection. The reversible door can be adjusted to be opened from the right or left side; shipped with door handle on the right side.
Two types of microprocessor controllers available: a) single setpoint automatic; b) programmable 2 ramp &2 dwell.
The single setpoint oven is designed as a single setpoint controller which reaches and maintains one temperature value.

Condition: Used
Chamber Dimension: 16"×16"×21"
Weight: 167 Lbs
OVerall Dimension: 21-1/4"×34-1/16"×27"

Laboratory Oven Watertown, WI (CAT#: STEM-GLEPO-0848-YJL)
Cole-Parmer 05012-20 In Woonsocket, RI, USA (CAT#: STEM-GLEPO-0851-YJL)
Cole Parmer 52000-55 60627 In Freehold Township, NJ, USA (CAT#: STEM-GLEPO-0863-YJL)
Cole-Parmer Laboratory Lab Oven Model 05015-58 In Oxnard, CA, USA (CAT#: STEM-GLEPO-0870-YJL)