Cole-Parmer 39457-00 In Woonsocket, RI, USA (CAT#: STEM-CCPO-0098-YJL)

Cole-Parmer 39457-00 In Woonsocket, RI, USA, model 39457-00, is manufactured by Cole-Parmer incubators.
The Cole-Parmer StableTemp Hybridization Incubator, Model 39457-00, eliminates the need for water baths and heat sealers. It offers programmable temperature range from 7 degrees above ambient to 85C. The Cole-Parmer Rotisserie accommodates standard 35-mm ID tubes. Touch pad simplifies temperature selection. Tube grips hold tubes securely and are kind to your hands. Incubators feature manual offset calibration.

Condition: Used
Electrical: 120V, 60Hz, 3.4Amps
Maximum temperature (°C): 85
Temperature uniformity: ± 0.5°C at 55°C (chamber), ± 0.25°C (sample-to-sample)
Temperature resolution: 0.1°C
Overall depth (in): 16 1/2
Overall depth (cm): 41.9
Overall Height (in): 17
Overall height (cm): 43.5
Overall width (in): 18
Overall width (cm): 45.7
Power (VAC): 120
Power (Hz): 60
Chamber depth (in): 8
Chamber depth (cm):20.3
Chamber height (in): 9 1/2
Chamber height (cm): 24.1
Chamber width (in): 15
Chamber width (cm): 38.1
Internal structure: Stainless steel
Minimum shaking speed (rpm): 5
Maximum shaking speed (rpm): 15
Description: Hybridization Incubators; small, 120 VAC/60 Hz, U.S. standard plug

Thermo Forma 3110 CO2 Incubator, 184L, Thermo Scientific (CAT#: STEM-CCPO-0024-YJL)
Forma 3226 Dual Chamber CO2 Incubators, 5.7 cu. Ft. per chamber, Thermo Scientific (CAT#: STEM-CCPO-0025-YJL)
Thermo Forma 3130 CO2 O2 Water Jacketed Incubator, 0 to 20% CO2 Concentration, Thermo Scientific (CAT#: STEM-CCPO-0026-YJL)
Thermo Forma Steri Cycle 370 CO2 Incubator, 29 cu. ft., Thermo Scientific (CAT#: STEM-CCPO-0027-YJL)