Cooling Incubator, -40～65℃, 600×600×700 mm, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-CC-0043-YJL)

Cooling Incubator, -40～65℃, 600×600×700 mm, model LRH-500CB is manufactured by Shanghai Yiheng Scientific Instruments Co., Ltd. In line with the trend of environmental protection in the world, international brand compressors and circulating fans have high efficiency and low energy consumption, which not only promotes energy saving, but also has a long service life, which can reduce noise to a minimum. Compared with traditional low-temperature equipment, the cooling time is reduced by 40%. above.

Temperature Range: -40～65℃
Temperature Resolution: 0.1℃
Temperature Stability: HIGH：±0.5℃ LOW：±1.0℃
Voltage: AC380V 50HZ
Working Temperature: +5～35℃
Input Power: 6100W
Interior Dimension(W×H×D)(mm): 600×600×700
Dimensions(mm): 800×1160×1850
Shelves(Standard): 3pcs
Timing Range: 0-9999min

● It adopts mirror surface stainless steel liner, and the four corners are semi-circular arc transition. The shelf bracket can be freely installed and removed, which is convenient for cleaning inside the box.
● Adopt microcomputer temperature controller to quickly reach the set value and operate more accurately and stably.
● International brand compressor and circulating fan, environmentally friendly refrigerant (R134a) has high efficiency, low energy consumption, and promotes energy saving.
● There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and temperature measurement.
● Equipped with an independent temperature limit alarm system, it will be automatically interrupted when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents.
● Can be equipped with a printer or RS485 interface, used to connect a printer and a computer, and can record changes in temperature parameters. (optional)
● Multi-segment programming function and menu-type operation interface can simplify the complex test process and truly realize automatic control and operation. (optional)

◆LCD multi-segment programmable controller (optional)
● Multi-segment liquid crystal programmable controller, one-screen display of various parameters, menu-type operation interface, which can simplify the complex test process and truly realize automatic control and operation.
● Parameters such as multi-stage temperature, circulating air speed, time and heating rate can be set and programmed at the same time. Gradient control of temperature rise can be performed, functions such as slow heating from the initial temperature in the box, etc., and functions such as automatic startup, standby and shutdown can also be preset.
● 30 segments of programs can be preset, each segment is 1 to 9999 minutes.

Heating Incubator(CAT#: STEM-CC-0047-YJL)
Heating Incubator(CAT#: STEM-CC-0048-YJL)
Precise Heating Incubator(CAT#: STEM-CC-0062-YJL)
Precise Heating Incubator(CAT#: STEM-CC-0063-YJL)