Corrosive/Acid Submersible Sump Pump, 47 GPM, Manual; Noryl/304SS/Buna, Cole-Parmer (CAT#: STEM-DS-1676-LC)

The Corrosive/Acid Submersible Sump Pump manufactured by Cole-Parmer is suitable for safeguarding vaults, emptying tanks, or pumping out ponds. Thermal breaker incorporated in motor windings provide overheating protection. The unique dual-port design avoids kinking of the hose.

Max Flow Rate (GPM):47
Max Flow Rate (LPM):177.9
Max Head (ft):28
Max Head (m):8.5
Max Pressure (PSI):125
Max Pressure (bar):8.6
Motor Type:Manual
Power (VAC):115
Power (Hz):60
Power (amps):5.0
Power (Phase):1
Wetted Materials:Noryl/304 SS rotor shaft, 316 SS hardware, Viton®/Buna seals
Outlet Connection:1.25" NPT(F) inside thread; 1.5" tapered hose connection
Max Temperature (° F):135
Max Temperature (° C):57
Duty Cycle Continuous:Yes
Length (in):9.875
Length (cm):25.1
Motor hp:0.4

Noryl material is resistant to rust, acids and alkalis
Compact and lightweight
Incorporate a completely automatic on/off level switch
Has a 22-ft power cord

Masterflex Submersible Dewatering Pump, 45 GPM/26 ft, 304 SS, Moderate-Flow, Automatic; 115 VAC, Cole-Parmer (CAT#: STEM-DS-1641-LC)
Mini Submersible Magnetic Drive Pump, 3 GPM or 4.6 FT, 1/2 inch Inlets, 115 volt, Cole-Parmer (CAT#: STEM-DS-1657-LC)