Customizable Acid Evaporator, Suitable for Beakers. (CAT#: STEM-SPE-0040-TP)

The acid purifier is suitable for food, disease control, medicine, agriculture, forestry, environmental protection, chemical industry, biochemical and other industries to drive acid in the later stage of microwave digestion and high pressure digestion. It is an ideal supporting product for analytical instruments such as atomic absorption, atomic fluorescence, ICP-AES, AA, and ICP-MS.

Model: GS type
Number of holes and hole diameter requirements: It can be processed into 12, 16, 20, 24, 36, 42, 54, 63, 72, etc. according to the customer's sample size, and the number of digits and the customization of special hole diameter × depth electric heating plate;
Heating method: Surrounding electric heating PID digital display
Temperature control range: room temperature -260℃
Temperature control accuracy: ±1℃
Anti-corrosion on the surface of the heating plate: imported Teflon coating
Heating plate material: exquisite aluminum alloy
Rated voltage: 220V
Continuous working time: ＞48h
Ancillary products: inner tanks of various factories, inner cups of digestion tanks, beakers, test tubes, crucibles, inner cups of digestion tanks, PFA sample dissolution tanks, etc.

1. High-quality PFA coating, one-touch clean, no rust, fast heating speed of Teflon anti-corrosion cast aluminum heating plate;
2. Working temperature: It can work continuously for 48 hours from room temperature to 260 °C, and it can be raised to 200 °C in 5-30 minutes (depending on the depth of the hole), and it can be heated to 200 °C within half an hour;
3. It can process a large amount of samples at one time and take a short time. Compared with the general hole-type digester that only relies on the plane heating and radiating facade, it can improve the work efficiency by 50%;
4. Surrounding heating, small temperature difference between holes, uniform heating, easy to use and long life;
5. The board surface and the control box can be made into separate parts, so that the acid mist during the experiment will not corrode the components in the control box, thereby increasing the service life, and multiple samples can be processed at the same time without cross-contamination;
6. Uniform digestion: the bottom of the vessel and the 360° wrapping heating make the sample heating without blind spots, with good stability and uniformity;
7. Time setting function can be added, segmented temperature control, that is, programmed temperature rise.