Desktop Low-speed Automatic Balancing Centrifuge, 5000r/min, Dimensions 370×432×250mm,L500 (CAT#: STEM-LC-0047-LGH)

Microcomputer control, touch panel, liquid crystal display, can display parameters such as rotor number, speed, centrifugal force, time and so on. Direct drive brushless motor, no toner pollution.
Adopt special shock absorber with automatic balance function.
With automatic electronic door lock, the centrifuge cannot be started when the door is not closed.
Equipped with safety protection devices.
Programmable operation, can store multiple routine programs.
The mold of the whole machine is formed at one time, and the appearance is simple and elegant.
It can be equipped with horizontal rotor, various pipe racks and adapters.

Support power supply: AC 220±22V50/60Hz10A
Maximum speed: 5000r/min
Total Power: 250W
Minimum acceleration/deceleration time: 30s/25s
Maximum relative centrifugal force: 4030xg
Machine noise: ≤60dB (A)
Speed accuracy: ±30rpm/min
Maximum capacity: 16×15 ml
Dimensions (L×W×H): 370×432m×250(mm)
Timing range: 0～99min
Outer packing size: 435×580×312(mm)
Net weight: 19kg
Centrifugal chamber diameter: Ф320mm
Gross weight: 21kg

Microcomputer control, touch panel, liquid crystal display, can display parameters such as rotor number, speed, centrifugal force, time and so on. Direct drive brushless motor, no toner pollution.
Adopt special shock absorber with automatic balance function.
With automatic electronic door lock, the centrifuge cannot be started when the door is not closed.
Equipped with safety protection devices.
Programmable operation, can store multiple routine programs.
The mold of the whole machine is formed at one time, and the appearance is simple and elegant.
It can be equipped with horizontal rotor, various pipe racks and adapters.