Determining the sugars and nucleosides by the ph indicator colorimetry based on boric acid affinity (CAT#: STEM-PPA-0024-LJX)

Introduction

A pH indicator colorimetric method based on boric acid affinity was established and applied to the determination of sugar and nucleoside samples. The linear relationship between solution concentration and absorbance of methyl orange and thymol blue indicators at different wavelengths was investigated and compared by using phenylboric acid as boric acid reagent, sugar and nucleoside as test objects.

Add to Cart Please Inquire

Principle Applications Procedure Materials Notes Related Products

Principle

Acid-base indicators produce different colors in aqueous solutions of their specific pH range. The indicator is added to the standard buffer solution, and the resulting color is used as the standard colorimetric tube. The pH value of the water sample can be measured by visual colorimetric comparison with the water sample colorimetric tube with the same indicator.

Applications

For determining the approximate PH value of solutions in food production, wastewater treatment, pharmaceutical and chemical industries

Procedure

1. Add ph indicator to the standard solution, and the solution with different pH will show different colors. Use these solutions as standard colorimetric tubes
2. Add the same ph indicator to the solution to be tested, and compare the color of the solution to be tested with the standard colorimetric tube to determine the approximate ph value of the solution

Materials

• Sample Type:
Sugar and nucleoside samples

Notes

After dropping the indicator into the solution, it should be gently shaken to avoid inaccurate detection.

Other recommended products

Determining the pH of soil by cresol red spectrophotometry (CAT#: STEM-PPA-0057-LJX)
Determination of ethanol content in wine by methyl orange fading spectrophotometry (CAT#: STEM-PPA-0032-LJX)
Evaluation of validity in seeds of Libidibia ferrea by phenolphthalein pH test (CAT#: STEM-PPA-0059-LJX)
Assessing the pH of the wound by litmus paper (CAT#: STEM-PPA-0039-LJX)
Monitoring pH variations in cementitious materials by alizarin yellow (CAT#: STEM-PPA-0061-LJX)
Determining the soil pH value by bromothymol blue spectrophotometry (CAT#: STEM-PPA-0026-LJX)
Determining the milk pH by bromothymol blue (CAT#: STEM-PPA-0027-LJX)
pH-indicator films based on soy protein isolate/bromothymol blue and methyl red for (CAT#: STEM-PPA-0036-LJX)