Diaphragm Vacuum Pump, Model MPC301Z, ZZKD (CAT#: STEM-GLE-0188-CJ)

Diaphragm vacuum pump, like circulating water vacuum pump and rotary vane vacuum pump, is a machine that provides a vacuum environment for the equipment. The equipment supporting the diaphragm vacuum pump includes: rotary evaporator, short path distillation, vacuum drying oven, vacuum suction filter, etc. Diaphragm pump, also known as control pump, is the main type of actuator, which receives the control signal output by the modulation unit. Diaphragm pumps are powered by power to change the flow of fluid. There are four materials for diaphragm pumps: plastic, aluminum alloy, cast iron, and stainless steel. Diaphragm pumps use nitrile rubber, neoprene rubber, fluorine rubber, polyvinylidene fluoride and polytetrahexaethylene respectively according to different liquid media. to meet the needs. It is placed in various special occasions to pump various media that cannot be pumped by conventional pumps. It is especially suitable for rotary evaporators and basically meets the requirements of conventional solvents.

Voltage (V): 220
Ultimate vacuum (mbar): <8
Flow rate (m3/h): 2.3
Flow rate (L/min): 38.3

Save the space of the laboratory, and carry a built-in wrench.
It is convenient to be matched with the rotary evaporator, and the whole system is designed for the same brand of equipment.
The operation is simple and convenient, without the trouble of changing the oil in the oil pump and changing the water in the water pump.
The diaphragm vacuum pump can be equipped with a solvent recovery device, and the solvent can be recovered twice during the exhaust process.
The exhaust speed selector switch design is set according to different uses, which can be used for high-speed exhaust or for silent decompression.
Diaphragm vacuum pump, with lower noise, can be directly connected to the vacuum controller, and can reach the vacuum degree faster than the ordinary type.
Standard equipped with a gas vibration valve, when the gas vibration valve is opened, the organic solvent pumped into the diaphragm pump can be discharged through the gas vibration valve.
It can effectively protect the diaphragm pump and reduce the loss of the diaphragm, but the opening of the gas vibration valve will affect the vacuum degree.

Solvent Recovery System CSC610, Max. Vacuum 2mbar, WIGGENS GmbH (CAT#: STEM-DS-1815-LC)
Vacuum Pump, 10 L/min, 0.04 ~ 0.08 Mpa (CAT#: STEM-GLE-0776-LGH)
Diaphragm Vacuum Pump, Model MPC601T, ZZKD (CAT#: STEM-GLE-0191-CJ)
Vacuum Control Systems, 50L/min (CAT#: STEM-GLE-1809-YJL)
High-power Chemical Resistant Diaphragm Pump C980V, 40L/min, WIGGENS GmbH (CAT#: STEM-DS-1801-LC)
Diaphragm Vacuum Pump, Model MPC602T, ZZKD (CAT#: STEM-GLE-0192-CJ)
Corrosion Resistant Diaphragm Pump-Professional, 20 L/min, 15-20 mbar, Shanghai Yiheng Scientific Instruments Co., Ltd (CAT#: STEM-GLE-0273-YJL)