Direct Current FFU, 615mm×1225mm×350mm, KLC Cleantech (CAT#: STEM-C-0202-ZJF)

Direct Current FFU FUDC-3 manufactured by KLC Cleantech provides continuous application for the turbulent layer and laminar flow clean room, with the wind speed up to 0.45m/s ±20%.

Size (W×L×H mm): 615×1225×350
Air chamber material: Galvalume / aluminum / stainless steel
Air Flow (m³/h): 1100~1200
Air velocity (m/s): 0.35~0.55
Total pressure (Pa): 210
Power (W): 95
Weight (kg): 39
Noise dB (1m below the HEPA filter): 55~63
Vibration (mm/s): 0.2~0.7
Power supply: 220V 1PH 50/60Hz (330V 3PH 50/60Hz 110V 1PH 50/60Hz)
Control mode: Single control or group control by computer
Options: DOP inject port / DOP sample port / differential pressure drop test port /differential pressure drop alarm device

HEPA filter
Size (W×H×Dmm): 610×1220×69
Efficiency: 99.99% 0.3μm
Frame: High quality anodized aluminum
Initial pressure drop: 110Pa@0.45m/s±15%
Trait: PU foam endless gasket

Energy saving: EC direct current smooth voltage wave line saves energy.
Intelligent Control: Use the remote automatic and intelligent control system to achieve a perfect match of the mechanical components and electronic control systems.
Easy start and stop: The starting current is only 1/5 of the AC fan, and multiple fans can be started at the same time with good braking performance.
Low heat power: DC fans with high energy efficiency make additional workspace to reduce the heat power.

Direct Current FFU, 575mm×875mm×350mm, KLC Cleantech
Direct Current FFU, 575mm×1175mm×350mm, KLC Cleantech
Direct Current FFU, 875mm×1175mm×375mm, KLC Cleantech
Direct Current FFU, 1175mm×1175mm×415mm, KLC Cleantech