DN-36W Water Bath Nitrogen Blower, Room Temperature~99°C, BiLon (CAT#: STEM-GLE-4103-LGZ)

It uses an internationally recognized technique to concentrate the sample by blowing nitrogen gas into the surface of the heated sample. The method has the characteristics of time-saving, convenient operation, easy control, etc., and the expected results can be obtained quickly. This technology uses solid-phase extraction pretreatment technology instead of traditional liquid-phase extraction and chromatography technology, so that samples can be quickly separated and purified. The nitrogen blowing instrument is used instead of the commonly used rotary evaporator for concentration, which greatly shortens the analysis time.

Heating method: water bath heating
Temperature control range: room temperature~99°C
Temperature fluctuation: ±0.1°C
Heating power: 400W
Sample position: 36
Test tube rack aperture: ∮16X45mm
Gas flow control valve: 36
Gas flow: 0-10L/min
Purge Needle Length: 150 mm
Gas flow meter: yes
Drain valve: yes
Purge module height adjustment method: electric lift

1. The purging module is highly electrically debugged and easy to operate.
2. Front knob type drain valve, easy to replace the medium.
3. The test tube holder of the water bath nitrogen blower can easily move the test tube out or into the water tank.
4. Precise temperature control, digital display, automatic temperature control.
5. Built-in gas rotameter.
6. The gas flow of each station can be adjusted individually

DC150-1B Visual Nitrogen Blower, +5°C ~150°C, YOONING(CAT#-STEM-GLE-4093-LGZ)
DC150-1A Pore Nitrogen Blower, +5°C ~150°C, YOONING(CAT#-STEM-GLE-4094-LGZ)
DC150-2 Dry Nitrogen Blower, 2 pieces, YOONING(CAT#-STEM-GLE-4095-LGZ)
DC150-1 Dry Nitrogen Blower, 1 piece, YOONING(CAT#-STEM-GLE-4096-LGZ)
DN-12A Nitrogen Blower, Room Temperature~150°C, BiLon(CAT#-STEM-GLE-4097-LGZ)
DN-24A Nitrogen Blower, Room Temperature~150°C, BiLon(CAT#-STEM-GLE-4098-LGZ)