DZF Series Vacuum Drying Oven, RT+10~200 ℃, Working Chamber Size 320×320×300 mm, Dimensions 610×485×485 mm, 1 Carrying Tray, Shanghai Jing Hong Laboratory Instrument Co., Ltd (CAT#: STEM-GLE-0049-LGH)

DZF Series Vacuum Drying Oven, DZF-6030, Shanghai Jing Hong Laboratory Instrument Co.,Ltd
1. Square studio to maximize the effective area. Toughened, bulletproof double glass door to observe objects in the working room at a glance.
2. The tightness of the door can be adjusted when it is closed. The silicone rubber door sealing ring formed as a whole ensures the high vacuum degree in the box.
3. Intelligent controller is based microprocessor with PID parameters Controlling function.Digital display of set and measured temperatures. High temperature controlling accuracy and reliability.
4. The heating power ratio can be adjusted arbitrarily to ensure that the low-end temperature control has no temperature overshoot.
5. Especially suitable for the decomposition of heat sensitive and easy to oxidize substances for drying, but also to the studio filled with inert gas for specific items for rapid drying. (Please contact the manufacturer if you need inert gas protection)
6. Can be installed SMS monitoring alarm system. When the user is not on site and the equipment fails, the system collects the fault signal in time and sends it to the mobile phone of the designated receiver in the first time through SMS to ensure that the fault is eliminated in time, the experiment is resumed and unexpected losses are avoided. (optional)

Power supply voltage: AC 220V，50HZ
Temperature control range (℃): RT+10~200 ℃
Temperature resolution: 0.1 ℃
Temperature fluctuatin: ±1 ℃
Consumed power: ＜350W
Vacuum: <133Pa
Vacuum gauge: Mechanical pointer
Working chamber size (mm): 320×320×300
Dimensions (mm): 610×485×485
Vacuum pump (standard): -
Carrying tray (standard): 1
Working Chambe materials: Stainless steel (1Cr18Ni9Ti)

Visualization, high vacuum, accurate temperature control