DZF Vacuum Drying Oven Series, 30.72L, 400W, ShangHai CIMO Medical Instrument co.,Ltd. (CAT#: STEM-GLE-1182-YJL)

YQX-Ⅱ Anaerobic Incubator, +3-105℃, model YQX-Ⅱ, is manufactured by ShangHai CIMO Medical Instrument co.,Ltd. The operation panel is placed on the upper part of the box, which is different from the one on the left side of the box, which makes the operation easier and easier to observe;
The box door is designed as a double-layer glass door, the glass door for sealing is high-quality tempered glass above 15mm, and the outer layer is 3mm bulletproof glass;
The 6050 box door is equipped with an on-off adjustment device, and the mouth of the studio has an integral one-time molded silicone sealing ring, which can ensure the tightness of the box door and the studio, and greatly improve the vacuum degree;
The least energy loss (zero heat loss), 6210, 6090, 6030, 6020 heaters are located on the shelf inside the box, which can minimize heat loss.

Volume: 30.72L
Heating method: electric heater
Vacuum: ＜133pa
Temperature control range: RT+10℃~250℃
Temperature resolution: 0.1℃
Constant temperature fluctuation: ±0.5℃
Studio material: 1Cr18Ni9Ti
Working time: continuous or 0~9999min timing
Power: 400W
Power supply: AC 220V 50Hz
Studio size: 320*320*300
Dimension: 490*500*595

There are several advantages to heating and drying items under vacuum conditions:
Can reduce drying temperature (low pressure, low temperature);
Avoid some items that will oxidize when heated;
Avoid hot air killing biological cells;
No dust particle damage.

DHG-Ⅲ Electric Heating Constant Temperature Blast Drying Oven Series (CAT: STEM-GLE-1186-YJL)
DHG-Ⅲ Electric Heating Constant Temperature Blast Drying Oven Series (CAT: STEM-GLE-1187-YJL)
Vacuum Drying Oven BPZ-LC Series(CAT: STEM-GLE-0210-YJL)
Vacuum Drying Oven-Microprocessor Controller (With Timing)(CAT: STEM-GLE-0222-YJL)
Vacuum Drying Oven-Electronic Semiconductor(CAT: STEM-GLE-0229-YJL)
Multi Box Vacuum Drying Oven BPZ(CAT: STEM-GLE-0240-YJL)