ECM PHANTOM Fan Filter Unit, 2' x 4', Gordon Incorporated (CAT#: STEM-C-0780-ZJF)

ECM PHANTOM Fan Filter Units manufactured by Gordon Incorporated provide air filtration with the highest performance, the quietest operation, and the lowest operating cost for cleanrooms.
ECM PHANTOM units are the most energy efficient units. Electronically commutated motors (ECM) deliver high torque values while consuming minimal energy.
Compared to conventional motor technology, this leading-edge motor technology has a significantly lower operating cost and pays for its cost premium within two years.
The units include all the features necessary for most FFU applications.

Pre-filter frame: top housing and sides are fabricated from galvanized steel
Motor/blower: 1/3 HP ECM tri-voltage motor, can be wired for 115/240/277 VAC/10" forward curve centrifugal blower
Filter: HEPA, 2" media pack with 3" anodized aluminum frame
Pre-filter: Merv 4 fiberglass, nominal 20" x 20" x 1"
Fan speed control: variable speed control/digital readout-rpm/flow index
Line connection: per NEC code
Face screen: anodized aluminum, 1/8" holes on 1/4" stg centers
Hanging provision: 1/4-20 threads provided in top (4) corners for suspension

Options:
ULPA final filters: 99.9995% efficiency @ 0.12 µm
PTFE final filters: to 99.99999% efficiency
Knife edge final filters for use in gel-seal ceilings
12-foot Power cord (ships separately for field attachment)
A/C duct collar for direct connection to HVAC ductwork

Low Operating Cost: High performance and low energy consumption are achieved by highly efficient ECM technology.
Input Power Adaptability and Speed Control: Motor speed can be controlled between 1% and 100% using the ECM motor controller, which can operate on any single-phase input line voltage of 120V to 240V.
Reserve Capacity: Typical external static loading can be compensated for by over 40% of the reserve capacity on the fan curve due to factory speed program settings.
Control And Monitoring Options: In addition to the Visual Control Unit (VCU) for manual speed adjustment with digital display, ECM PHANTOM is equipped with a Modbus RTU interface which can be used to communicate with remote Building Management Systems (BMS) of Industrial Automation System (IAS) software architectures.
Low Noise: The unit operates at an exceptionally quiet noise level of NC-40 when set to high speed.
Safety: ECM PHANTOM is listed and approved by U.L. and CUL.
Reliability: Motors generally can be expected to last over 11 years, with a rating of 100,000 hours.
Replaceable Prefilters: HEPA final filters are protected and extended in life by MERV 4 prefilters.
Perforated Air Diffuser Face Screen: The perforated aluminum face screens provide both unidirectional airflow and protection for the HEPA filter media.

STANDARD PHANTOM Fan Filter Unit, 2' x 2', Gordon Incorporated
STANDARD PHANTOM Fan Filter Unit, 2' x 3', Gordon Incorporated
STANDARD PHANTOM Fan Filter Unit, 2' x 4', Gordon Incorporated
ECM PHANTOM Fan Filter Unit, 2' x 2', Gordon Incorporated
ECM PHANTOM Fan Filter Unit, 2' x 3', Gordon Incorporated
R2F PHANTOM Fan Filter Unit, 2' x 2', Gordon Incorporated
R2F PHANTOM Fan Filter Unit, 2' x 4', Gordon Incorporated
R2F-ECM PHANTOM Fan Filter Unit, 2' x 2', Gordon Incorporated
R2F-ECM PHANTOM Fan Filter Unit, 2' x 4', Gordon Incorporated