Unlock Exclusive Discounts & Flash Sales! Click Here to Join the Deals on Every Wednesday!

Edwards E2M0.7 Vacuum Pump, Edwards (CAT#: STEM-GLE-0609-LGZ)

Highlights

1. Two-stage oil-sealed rotary vane pump.
2. There is a pressurized oil system to lubricate the pump shaft bearing surfaces and rotor sealing surfaces.
3. Equipped with oil distribution valve to prevent any oil from draining into the pump (suction back) after the pump is stopped.

Cat Number: STEM-GLE-0609-LGZ

Application: Designed for vacuum extraction.

Model: E2M0.7

Add to Cart



Description

The manufacturer of Edwards E2M0.7 Vacuum Pump is Edwards. Model is E2M0.7. Featuring high ultimate vacuum, fast pumping speeds, quiet operation and the ability to handle steam, the EM Series oil-sealed rotary pumps have become the industry standard for laboratory and light industrial applications. The pump is a self-contained unit, powered by a single-phase or three-phase (four-pole) motor through a flexible coupling.

Specification

Condition: used
Operating temperature range: 12 - 40 °C
Motor power: 0.09 kW
Noise: 43 dB(A) at 50 Hz
Noise with acoustic enclosure: 36 dB(A) at 50 Hz
Pumping speeds: 0.7 to 1.5 m3h-1
Nominal rotational speed 50/60Hz: 1400/1700 rpm
Low energy consumption: 0.09 kW.
Oil capacity maximum: 0.28 litre
Oil capacity minimum: 0.2 litre
Recommended oil: Ultragrade 15
Displacement (swept volume) 50 Hz: 0.9 m3h-1 / 0.5 ft3min-1
Displacement (swept volume) 60Hz: 1.1 m3h-1 / 0.6 ft3min-1
Speed (Pneurop 6602) 50 Hz: 0.75 m3h-1 / 0.4 ft3min-1
Speed (Pneurop 6602) 60Hz: 0.95 m3h-1 / 0.5 ft3min-1
Ultimate vacuum (total pressure)
without gas ballast: 3.0 x 10-3 mbar / 2.3 x 10-3 Torr
with full gas ballast: 2.0 x 10-1 mbar / 1.5 x 10-1 Torr
Inlet connection: NW10 flange
Outlet connection: Nozzle 11 mm external diameter removable from 3/8 inch BSP tapped hole
Maximum permitted pressure at outlet: 0.5 bar gauge / 7 psig
Maximum inlet pressure for water vapour: 15 mbar / 11 Torr
Maximum water vapour pumping rate: 8 gh-1
Power connector: IEC EN60320 C13
O ring sealed sight glass: allows visual inspection of oil level and condition.
Gas ballast valve: for large water vapour handling capacity.
Forced air cooling: ensures low pump surface temperature.

Features

1. Two-stage oil-sealed rotary vane pump.
2. There is a pressurized oil system to lubricate the pump shaft bearing surfaces and rotor sealing surfaces.
3. Equipped with oil distribution valve to prevent any oil from draining into the pump (suction back) after the pump is stopped.
4. It is equipped with a gas-tight pump chamber so that the oil cannot flow back unless the gas ballast valve is opened.

Related Products

Edwards PM-13195-820.3 Vacuum Pump, Edwards(CAT#-STEM-GLE-0481-LGZ)
Wave Biotech GasPump20 Peristaltic Pump, Wave Biotech(CAT#-STEM-GLE-0531-LGZ)
Welch Gem 1.0 Vacuum Pump, Welch(CAT#-STEM-GLE-0544-LGZ)
Agilent MS40+ Pump, Agilent(CAT#-STEM-GLE-0582-LGZ)
Motor Division SA55JXGTD-4144 Pump, Paker(CAT#-STEM-GLE-0583-LGZ)
Buchi V-500 Pump, Buchi Laboratoriums-Tecknik(CAT#-STEM-GLE-0584-LGZ)