µEncapsulator 2 Reagent Droplet Chip, Fluorophilic, dolomite (CAT#: STEM-ME-0363-WXH)

The fluorophilic 2 Reagent Droplet Chip for the µEncapsulator module enables 2–reagent droplets containing biological material to be generated with ease. An output droplet size in the range Ø30µm –Ø70µm can typically be selected with high monodispersity. This chip interfaces directly with the Sample Reservoir Chip via the supplied FKM gasket. It can also be addressed independently for basic tests using the Multiflux® Linear Connector 4-way and Top Interface 4–way 2.15 mm. The 2 reagent streams meet immediately before the junction, minimising mixing prior to the formation of droplets.

Chip size 11.25mm x 15mm x 2mm
Attached FKM 0.5mm thick gasket for chip-to-chip connection
Channel cross-section at the junction 50 µm x 55 µm (depth x width)
Channel cross-section after the junction 50 µm x 150 µm (depth x width)
Fluorophilic surface coating for use with fluorocarbon carrier oils
F20* flow resistor on each droplet line
F600* flow resistor on oil line
On-chip filter on droplet lines with pore size 50µm x 55µm (depth x width)
On-chip filter on carrier oil line with pore size 25µm x 55µm (depth x width)

Straight Channel Chips, Microscopy slide, 1 Channel, Fluidic 268, microfluidic ChipShop (CAT#:STEM-ME-0001-WXH)
Cross Shaped Channel Chips, Fluidic 82, microfluidic ChipShop (CAT#:STEM-ME-0017-WXH)
H-Shaped Channel Chips, Fluidic 164, microfluidic ChipShop (CAT#:STEM-ME-0027-WXH)
Rhombic Chamber Chips eP1, Fluidic 221, 100 µl Chamber Volume, microfluidic ChipShop (CAT#:STEM-ME-0028-WXH)
Reaction Chamber Chips, Fluidic 843, 2.5 µl Chamber Volume, microfluidic ChipShop (CAT#:STEM-ME-0038-WXH)
PCR Chamber Chips with Dead-End Air Reservoir, Fluidic 675, 8 Chambers, 20 µl Chamber Volume, microfluidic ChipShop (CAT#:STEM-ME-0056-WXH)
Droplet Generator Chips, One Channel, Fluidic 162, microfluidic ChipShop (CAT#:STEM-ME-0058-WXH)