Eppendorf Centrifuge 5810 With Rotor FA-45-48-11, Eppendorf (CAT#: STEM-LCPO-0164-ZJF)

The manufacturer of the Eppendorf Centrifuge 5810 With Rotor FA-45-48-11is Eppendorf.
The Eppendorf 5810 Benchtop Centrifuge provides you with the most compact 3-liter capacity out there, with the same reliability and ease of use you expect from Eppendorf. This benchtop centrifuge is built for high-capacity runs of a medium to high throughput lab, with the broad rotor and adapter selection for a flexible solution. This high-capacity Eppendorf model can be used with both tubes and plates, with a maximum of 4 × 750 mL (or max. 28 × 50 mL/56 × 15 mL), depending on the rotor type. This easy-to-use Eppendorf 5810 Centrifuge is microprocessor controlled, with 10 acceleration and 10 deceleration profiles, a timer of up to 99 minutes, and will hold 35 user-defined programs.
The product is located in Rocklin, CA, USA.

Condition: Certified Pre-owned
Max. RCF: 20,913 × g
Max. RCF with fixed-angle rotor: 20,913 × g
Max. RCF with swing-bucket rotor: 4,500 × g
Max. RCF with plate rotor: 3,486 × g
Speed: 200–14,000 rpm
Max. capacity: 4 × 750 mL/4 × 4 MTP
Rotors available: 18
Acceleration/braking ramps: 45209
Number of programs: 35 user-defined programs
Timer: 1 min to 99 min, with continuous run function, short-spin
Noise level: <70 dB(A)
Power: 120 V, 50?–?60 Hz , 900 W
Dimensions: 21x24x14"
Weight: 158lbs

In excellent condition
Thoroughly cleaned
Fully tested to perform at manufacturer specifications

Eppendorf Mastercycler Pro 384 Thermal Cycler, Eppendorf
Eppendorf 96 Well Plate Rotor Holders, Eppendorf
Eppendorf 6131 20207 Biophotometer Spectrophotometer, Eppendorf